E35z Mini Excavator

E35z Mini Excavator

The new Bobcat® E35z, a new generation model in the popular 3.5 tonne machine class offers the additional benefits of ZHS design. This excavator provides the best possible mix of compactness, a large operating range for the workgroup (especially with the optional long arm), great stability (two counterweight options available) and a large and comfortable operator area. This machine tops out the R-Series range and will be appreciated by customers with a need for a high specification ZHS model, whilst preferring the lower cost of ownership compared to higher tonnage machines.

E35z Specifications

Compare

Key Specifications

Operating weight
3499 kg
Digging depth
3.1 m
Engine power
18.2 kW
Digging breakout force
20790 N
Tail swing type
ZHS 

Key Specifications

Operating weight
3499 kg
Digging depth
3.1 m
Engine power
18.2 kW
Digging breakout force
20790 N
Tail swing type
ZHS 

Weights

Operating weight with cab and bucket (ISO 6016)
3499.00 kg
Transport mass (no attachment)
3335.00 kg
Weight reduction with canopy
-118.00 kg
Additional weight for cab with HVAC
19.00 kg
Additional weight for steel tracks
130.00 kg
Additional weight for long dipperstick (with heavy ctw.)
303.00 kg
Ground pressure with rubber tracks
31.84 kPa

Working Range

Bucket pivot angle
185.00 °
Maximum reach of working equipment
5351.00 mm
Maximum reach of working equipment, long dipperstick
5633.00 mm
Maximum reach at ground level
5230.00 mm
Maximum reach at ground level, long dipperstick
5520.00 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2267.00 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2324.00 mm
Maximum blade height
382.00 mm
Maximum blade depth
456.00 mm
Maximum height of working equipment with dipperstick retracted
3708.00 mm
Maximum bucket tooth height
4804.00 mm
Maximum bucket tooth height, long dipperstick
4985.00 mm
Maximum dump height
3340.00 mm
Maximum dump height, long dipperstick
3521.00 mm
Maximum depth of vertical wall which can be excavated
2136.00 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
2414.00 mm
Maximum digging depth
3117.00 mm
Maximum digging depth, long dipperstick
3417.00 mm

Dimensions

Blade height
322.00 mm
Clearance, upper structure to ground line
540.00 mm
Ground line to top of engine cover
1557.00 mm
Length of track on ground
1647.00 mm
Machine centre line to blade
1528.00 mm
Minimum radius in travel position
3787.00 mm
Overall length of track assembly
2074.00 mm
Overall length in travel position
4823.00 mm
Overall length in travel position, long dipperstick
4832.00 mm
Track lug height
25.00 mm
Blade width
1750.00 mm
Height
2468.00 mm
Track width
300.00 mm
Machine centre line to working equipment centre line, left-hand rotation
575.00 mm
Machine centre line to working equipment centre line, right-hand rotation
795.00 mm
Minimum turning radius
1788.00 mm
Swing clearance, rear
875.00 mm
Swing clearance, rear, long dipperstick (with heavy counterweight)
965.00 mm
Working width at maximum right-hand rotation
1841.00 mm
Working width at maximum left-hand rotation
1805.00 mm

Engine

Make / model
Kubota / D1703-E4B (Stage V) 
Fuel
Diesel 
Number of cylinders
3 
Displacement
1642.00 cm3
Maximum power @ 2200 rpm (ISO 14396)
18.20 kW
Maximum torque (SAE)
97.40 Nm

Hydraulic System

Pump type
Single outlet variable displacement, load sensing torque. Pump with gear pumps 
Total hydraulic capacity
101.20 L/min
Auxiliary (AUX1) flow
64.00 L/min
Auxiliary (AUX2) flow
20.00 L/min
Auxiliary (AUX1) relief
206.00 bar
Auxiliary (AUX2) relief
179.00 bar

Performance

Digging force, dipperstick (ISO 6015)
20790.00 N
Digging force, long dipperstick (ISO 6015)
18010.00 N
Digging force, bucket (ISO 6015)
33430.00 N
Drawbar pull
34132.00 N
Travel speed, low range
2.60 km/h
Travel speed, high range
4.70 km/h

Slew System

Boom swing, left
75.00 °
Boom swing, right
55.00 °
Slew rate
8.60 RPM

Fluid Capacities

Fuel reservoir
52.00 L
Hydraulic reservoir
8.30 L

Environmental

Noise level LpA(EU Directive 2006/42/EC)
77.00 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
94.00 dB(A)
Whole body vibration (ISO 2631–1)
0.11 ms2
Hand-arm vibration (ISO 5349–1)
0.34 ms2

Standard Features

1750 mm dozer blade
yes 
300 mm rubber tracks
yes 
Adjustable double acting auxiliary hydraulic (AUX1) with Quick Couplers
yes 
Battery disconnect switch
yes 
Blade float feature
yes 
Clamp ready
yes 
Control console locks
yes 
Cupholder
yes 
Dual Direction Detent
yes 
Engine/hydraulic monitor with shutdown
yes 
Foldable and ergonomic pedals
yes 
Full fuel warning alarm
yes 
Horn
yes 
Hydraulic joystick controls
yes 
Proportional fingertip auxiliary and boom swing offset hydraulic control
yes 
Retractable seat belt
yes 
Suspension seat with high back
yes 
Storage compartment
yes 
TOPS/ROPS/FOPS canopy *
yes 
Two-speed travel with Auto shift
yes 
Upper structure four-point tie down
yes 
Water separator
yes 
Work light (boom)
yes 
Warranty: 24 months, 2000 hours (whichever occurs first)
yes 

Options

Comfort package cab (Cloth susp. seat & Dlx displ.)
yes 
A-SAC package (Tilt coupler lines, Dlx displ.)
yes 
Object handling package (Valves, OWD, Lifteye)
yes 
TOPS/ROPS/FOPS cab
yes 
Long dipperstick w/hvy ctw.
yes 
Steel tracks
yes 
AUX1 direct return to tank
yes 
AUX2 hydraulics
yes 
AUX1/AUX2/Drain on arm
yes 
Bucket valves (AUX3) kit
yes 
Hydr. coupler lines (AUX5)
yes 
Case drain line
yes 
Auto idle
yes 
Keyless ignition
yes 
Travel motion alarm
yes 
AM/FM MP3 radio
yes 
Additional halogen lights
yes 
LED lights set
yes 
Beacon
yes 
Special application kit
yes 
L/R mirrors
yes 
Clamp w/ AUX1 valve
yes 
Klac D and MS03 coupler
yes 
Bobcat hydr. pin grabber
yes 
Grease Gun w/ holder
yes 

E35z Features

Popular Attachments

View All
  • Auger Auger

    Auger

    Speed and perfect vertical accuracy are what you get with this high-torque, heavy-duty hydraulic auger.
  • Breaker Breaker

    Breaker

    Bobcat breakers offer high performance, low maintenance, and are easy to use.
  • Bucket, Clay Spade Bucket, Clay Spade

    Bucket, Clay Spade

    Ideal for precision digging when installing or repairing pipes.
  • Bucket, Digging, Heavy Duty Bucket, Digging, Heavy Duty

    Bucket, Digging, Heavy Duty

    A heavy duty bucket for the toughest digging and material handling jobs.
  • Bucket, Digging, Standard Duty Bucket, Digging, Standard Duty

    Bucket, Digging, Standard Duty

    A standard duty bucket for all digging and material handling jobs.
  • Bucket, Digging, UK Type Bucket, Digging, UK Type

    Bucket, Digging, UK Type

    A UK-type bucket for all digging and material handling jobs.
  • Bucket, German Profile Bucket, German Profile

    Bucket, German Profile

    A bucket with a German profile for all digging and material handling jobs.
  • Bucket, Grading Bucket, Grading

    Bucket, Grading

    Clean or backfill ditches quickly, easily and efficitently.
  • Bucket, Grading, German Type Bucket, Grading, German Type

    Bucket, Grading, German Type

    A German type grading bucket for cleaning or backfilling ditches with ease.
  • Bucket, Grading, UK Style Bucket, Grading, UK Style

    Bucket, Grading, UK Style

    A UK-style grading bucket for all ditch cleaning or backfilling jobs.
  • Bucket, Skeleton Bucket, Skeleton

    Bucket, Skeleton

    Allows sand, dry fine dirt and water to drain while picking up solid bulky material like rocks, stones, roots, and debris.
  • Bucket, Tilt Bucket, Tilt

    Bucket, Tilt

    Saves time and improves productivity.