Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

E57W Wheeled Excavator

Specifications & Options


Close/Open all PDF version
Operating weight
5,930 kg
Additional weight for long dipperstick
23 kg
Bucket pivot angle
180 °
Maximum reach of working equipment
6,108 mm
Maximum reach of working equipment, long dipperstick
6,400 mm
Maximum reach at ground level
5,888 mm
Maximum reach at ground level, long dipperstick
6,190 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,448 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,464 mm
Maximum blade height
421 mm
Maximum blade depth
202 mm
Maximum height of working equipment with dipperstick retracted
4,686 mm
Maximum bucket tooth height
5,976 mm
Maximum bucket tooth height, long dipperstick
6,170 mm
Maximum dump height
4,324 mm
Maximum dump height, long dipperstick
4,510 mm
Maximum depth of vertical wall which can be excavated
2,805 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
3,115 mm
Maximum digging depth
3,495 mm
Maximum digging depth, long dipperstick
3,795 mm
(* Dentoes values which long dipperstick installed)
Blade height
500 mm
Clearance, upper structure to ground line
980 mm
Ground line to top of engine cover
1,935 mm
Wheel base
2,100 mm
Machine centre line to blade
1,678 mm
Minimum radius in travel position
4,260 mm
Overall length in travel position
6,120 mm
Blade width (single tyre)
1,920 mm
Blade width (dual tyre)
2,290 mm
2,950 mm
1,600 mm
Minimum turning radius
1,980 mm
Swing clearance, rear
1,650 mm
Make / model
Bobcat / D24
Number of cylinders
2,392 cm3
Maximum NET power (ISO 14396)
42.5 kW
Maximum NET torque (ISO 14396)
204 Nm
Pump type
Split engine-driven axial piston pump and two engine-driven gear pumps
Pump capacity
180.3 L/min
Auxiliary flow
52.5 L/min
System relief pressure for auxiliary circuit 3
226 bar
System relief pressure for auxiliary circuit 2
235 bar
Digging force, dipperstick (ISO 6015)
27,459 N
Digging force, long dipperstick (ISO 6015)
24,517 N
Digging force, bucket (ISO 6015)
41,188 N
Drawbar pull
32,362 N
Travel speed, low range
10 km/h
Travel speed, high range
30 km/h
Boom swing, left
80 °
Boom swing, right
50 °
Slew rate
9.4 RPM
Cooling system
11.2 L
Engine lubrication plus oil filter
9.2 L
Fuel reservoir
118 L
Hydraulic reservoir
95 L
Hydraulic system
148 L
Noise level LpA(EU Directive 2006/42/EC)
75 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
98 dB(A)
Whole body vibration (ISO 2631–1)
0.6 ms-2
Hand-arm vibration (ISO 5349–1)
0.5 ms-2
  • Boom and arm load holding valve
  • Dozer blade safety valve
  • Fully adjustable air conditioning
  • Heated suspension seat with high back
  • Consoles with forwards/backwards adjustable displacement
  • Steering column with adjustable angle
  • Second auxiliary hydraulic line (Rotation piping)
  • Fingertip auxiliary hydraulic control
  • Control console locks
  • Hydraulic joystick controls
  • Two-speed travel
  • Lockable storage compartment
  • Horn
  • Work lights
  • Retractable seat belt
  • TOPS/ROPS cab (1)
  • Harness for rotating beacon
  • Overload warning device
  • Sun visor
  • Two left and one right rear view mirrors
  • Electric refueling pump
  • Auto idle
  • Warranty: 24 months, 2000 hours (whichever occurs first)
  • 7 inch Deluxe screen
  • Hydraulic coupler lines

(1) Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117

  • Long dipperstick
  • Twin tyres with 2290 mm dozer blade
  • Third auxiliary hydraulic line (Clamshell Piping)

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.