- Home
- Equipment
- Telehandlers
- Bobcat TL35.70 Construction Telehandler
TL35.70 Construction Telehandler
TL35.70 Construction Telehandler
The Bobcat R-Series TL35.70 Telehandler offers a 7-meter boom with outstanding stability for all your construction needs. Handle daily tasks with a familiar, intuitive automotive-style layout and an all-in-one joystick with improved ergonomics.
TL35.70 Overview
TL35.70 components are well protected thanks to the shielded design, while the robust frame and boom make Bobcat Telehandlers extra tough. The smooth and automatic transmission offers surgical precision and maximum uptime with a standard 3-year warranty (or 3000 hours) on the entire machine for peace of mind.
TL35.70 Specifications
Compare
Key Specifications
TL35.70 Construction Telehandler
Rated Capacity
3500 kg
Lifting height
6.9 m
Rated power (ISO 14396)
74 kW
Max reach
4 m
Unladen weight
7075 kg
Load Charts
TL35.70 Construction Telehandler
With forks and DUNLOP 405/70 x 20 SPT9 (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 400/80 x 24 156B (option) tyres
Complies with stability test EN1459 Annex B
With forks and standard 405/70 x 20 tyres or DUNLOP 400/70 x 20 150B 168A2 (option) tyres
Complies with stability test EN1459 Annex B
Performance
TL35.70 Construction Telehandler
Drawbar pull (20" tyres)
8000.00
Reach at max height on tyres (24" tyres)
1123.00 MM
Capacity at max. reach (20" tyres)
1500.00 KG
Rated capacity
3500.00 KG
Capacity (at max. height on tyres)
3500.00 KG
Max. gradeability (24" tyres)
33.00
Max. gradeability (20" tyres)
33.00
Reach at max height on tyres (20" tyres)
1036.00 MM
Tilt Breakout force
6200.00
Max. gradeability with rated load (20" tyres)
33.00
Drawbar pull (24" tyres)
7000.00
Lifting height (24" tyres)
6973.00 MM
Max. reach (24" tyres)
3915.00 MM
Capacity at max. reach (24" tyres)
1500.00 KG
Max. gradeability with rated load (24" tyres)
33.00
Lifting height (20" tyres)
6889.00 MM
Max. reach (20" tyres)
4002.00 MM
Cycle Times
TL35.70 Construction Telehandler
Boom raising
8.00
Dumping
2.70
Crowding
3.00
Boom extension
7.10
Boom lowering
6.00
Boom retraction
6.50
Hydraulic System
TL35.70 Construction Telehandler
Pump type
Gear pump with LS valve
Relief valve pressure setting
250.00 BAR
Control valve type
Open center with flow sharing & flow compensators technology
Auxiliary flow rear
100.00
Hydraulic filter specs
Full flow filtration
Hydraulic tank
59.00 L
Auxiliary flow front
100.00
Pump capacity
100.00
Drive System
TL35.70 Construction Telehandler
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor + 2 speed gearbox
Traction
TL35.70 Construction Telehandler
Optional tyres
400/80-24 / 20PR TM R4
Low range - rabbit mode (24" / 20")
11 / 10
High range - turtle mode (24" / 20")
16 / 14
Standard tyres
405/70-20 16PR TM R4
Low range - turtle mode (24" / 20") - (Option high speed)
6 / 5
High range - rabbit mode (24" / 20") - (Option high speed)
40 / 35
High range - rabbit mode (24" / 20")
30 / 26
High range - turtle mode (24" / 20") - (Option high speed)
18 / 16
Low range - turtle mode (24" / 20")
6 / 5
Low range - rabbit mode (24" / 20") - (Option high speed)
12 / 10
Brakes
TL35.70 Construction Telehandler
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Parking brake
Passive brake
Steering
TL35.70 Construction Telehandler
Steering pump
Priority valve on control valve
Steering modes
Button and screen for selection
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Fluid Capacities
TL35.70 Construction Telehandler
Adblue ® tank
28.80 L
Axles front/rear
9,1/9,1
Gear Box
1.80 L
Engine oil with filter
12.60 L
Cooling system with heater
14.50 L
Hydraulic system
105.00 L
Fuel tank
138.00 L
Fluid Specifications
TL35.70 Construction Telehandler
Grease for hinges and boom gliders
TOTAL MULTIS EP2
Brake fluid
None. Brakes use hydraulic system pressure
Coolant
Ethylen Glycol Mix 50:73
Hydraulic fluid
MS68
Transmission oil
ELF SF3 / TOTAL DYNATRANS FR
Engine oil
"ACEA E7/9 API CJ-4 or above Viscosity: -30 to 40 °C : SAE 0W30 -20 to 40°C : SAE 5W30 -15 to 40°C : SAE 10W30"
Controls
TL35.70 Construction Telehandler
Front auxiliary
Variable thumbwheel on joystick
Steering
Proportional hydraulic steering via a conventional steering wheel
Secondary brake
Passive brake
Eco mode
Eco mode switch
SHS mode
SHS mode switch
Auxiliary pressure release
Bobcat Coupler
Engine
Electronic engine speed governor
Speed range and Forward/reverse drive
Switch for hydrostatic motor and switch on joystick or lever for FNR
Starting
Key-type starter switch and shutdown.
Boom exension /retraction
Variable thumbwheel on joystick
Service brake
Pedal-activated wet multi-disk on front axle
Boom raising / lowering
Joystick electronic
Environmental
TL35.70 Construction Telehandler
Whole body vibration (EN 13059)
1.40
Sound pressure level at the operator station 2014 /1322 Annexe XIII - 40kmh : doors closed (doors opened) (LpA)
75 dB(A)
Level of acoustic power (LWA)
106.00
Operator noise level (LpA) (EN 12053)
73.00
Safety
TL35.70 Construction Telehandler
Parking brake, standard
Always set brake when leaving the machine
Rated load capacity charts, standard
Attached inside the cab. Provide rated load capacities for loads and attachments.
Seat belt, standard
Should always be worn when operating the machine
Back-up alarm, standard
For use in jobs with low visibility. Alarm sounds when operated in reverse.
Front and rear work lights, standard
Use for indoor and low light operation
Grab handles, standard
Should always be used when entering/exiting the telescopic
Emergency button, standard
Switches off the engine and blocks boom movements.
Rear window, standard
For emergency exit
Fully enclosed operator cab. standard
Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS).
Boom stop, standard
Use for servicing if boom is raised
Electrical
TL35.70 Construction Telehandler
Alternator
140.00
Battery
110.0
Starter
2.70
Dimensions
TL35.70 Construction Telehandler
Overall length (to forks tip)
6074.00 MM
Overall length (to forks face)
4869.00 MM
Overall length (to headstock pin)
4763.00 MM
Overall length (to front tyres / Stabilizers (when equipped)
4058.00 MM
Overall length (to front tyres 24" / Stabilizers (when equipped)
4145.00 MM
Overall height (with rotating beacon)
2503.00 MM
Overall height with 24" tyres (with rotating beacon)
2587.00 MM
Overall height (with roof wiper)
2373.00 MM
Overall height with 24" tyres (with roof wiper)
2457.00 MM
Height back of the machine
1668.00 MM
Height back of the machine with 24" tyres
1752.00 MM
Ground clearance
346.00 MM
Ground clearance with 24" tyres
430.00 MM
Length - Front axle to forks face
1356.00 MM
Wheelbase
2870.00 MM
Length - Rear axle to machine rear
643.00 MM
Operator cab outside width
1013.00 MM
Track width
1895.00 MM
Width over standard tyres
2300.00 MM
External turning radius (at tyres)
3714.00 MM
External turning radius with 24" tyres (at tyres)
3714.00 MM
Internal turning radius (cab)
1092.00 MM
Internal turning radius with 24" tyres (cab)
1092.00 MM
External turning radius (with forks spaced 1040 mm ext.)
4925.00 MM
External turning radius with 24" tyres (with forks spaced 1040 mm ext.)
4925.00 MM
Carriage rotation angle
135.00
Engine
TL35.70 Construction Telehandler
Air filter
Dry replaceable cartridge with safety element
Make / Model
Bobcat D34
Rated speed
2400.00 RPM
Ignition
Diesel compression
Crankshaft ventilation
Close breathing
Fuel
"Diesel fuel low Sulphur - EN 590 : 2013 -ASTM D975C-15 Grade 1D or 2D S15"
Cooling
COOLANT
Maximum torque at 1400 rpm
430.00
Stroke
113.00 MM
Number of Cylinders
4.0
Lubrication
Gear pump pressure
Displacement
3.41 L
Rated power (ISO 14396)
74.00 KW
Bore
98.00 MM
Weights
TL35.70 Construction Telehandler
Unladen weight (20" tyres)
7075.00 KG
Unladen operating Weight (20" tyres)
7275.00 KG
Unladen operating Weight on rear axle (20" tyres)
4280.00 KG
Unlade operating Weight on front axle (24" tyres)
3065.00 KG
Max ground Pressure on tyres-hard soil
11.0
Unladen weight (24" tyres)
7215.00 KG
Unladen operating Weight on rear axle (24" tyres)
4350.00 KG
Unlade operating Weight on front axle (20" tyres)
2995.00 KG
Unladen operating Weight (24" tyres)
7415.00 KG
Instruments
TL35.70 Construction Telehandler
Instruments
yes
Engine RPM
yes
Total operating hours
yes
Job hours
yes
Boom angle
yes
Vehicle speed
yes
Fuel gauge
yes
Engine coolant temperature gauge
yes
Front and rear wheel alignment status on screen
yes
Headlight full beam
yes
Headlight low beam
yes
Position lights
yes
Left and right turn
yes
Trailer turn
yes
Parking brake
yes
Longitudinal stability level
yes
Windscreen wipers
yes
Work lights
yes
Flashing warning light
yes
Hazard warning lights
yes
Gear Speed choice
yes
Hydraulic function lock
yes
Rear fog lights
yes
Heater fan
yes
Hydraulic fluid over-temperature
yes
Engine coolant over-temperature
yes
Low oil pressure
yes
Battery not charging
yes
Longitudinal stability alarm
yes
Serviceability
TL35.70 Construction Telehandler
Serviceability
yes
Air cleaner
yes
Fuel filter
yes
Engine oil filter
yes
Engine oil dipstick
yes
Starter
yes
Alternator
yes
Glass washer fluid
yes
Fuses, diodes and relays
yes
ISL control box
yes
TL35.70 Construction Telehandler
TL25.60 Construction Telehandler
Compare
TL30.60 Construction Telehandler
Compare
TL30.70 Construction Telehandler
Compare
T35.105L Construction Telehandler
Compare
T36.120SL Construction Telehandler
Compare
T40.180SLP Construction Telehandler
Compare
T41.140SLP Construction Telehandler
Compare
TL35.70 Video Gallery
See the New R-Series Telehandlers for Construction in Action