- Home
- Equipment
- Telehandlers
- Bobcat T36.120SL Construction Telehandler
T36.120SL Construction Telehandler
T36.120SL Construction Telehandler
The Bobcat R-Series T36.120SL Telehandler offers a 12-meter boom with stabilizers and leveling for outstanding stability in a compact format. The machine offers a great balance between maneuverability and performance.
T36.120SL Overview
T36.120SL components are well protected thanks to the shielded design, while the robust frame and boom make Bobcat Telehandlers extra tough. Handle daily tasks with a familiar, intuitive automotive-style layout and an all-in-one joystick with improved ergonomics. The smooth and automatic transmission offers surgical precision and the maximum uptime with a standard 3-year warranty (or 3000 hours) on the entire machine gives you peace of mind.
The T36.120SL is available in the following configurations: 75 hp and 100 hp. Please contact your nearest dealer for more information.
T36.120SL Specifications
Compare
Key Specifications
T36.120SL Construction Telehandler
Rated Capacity
3600 kg
Lifting height
11.9 m
Rated power (ISO 14396)
74 kW
Max reach
8.2 m
Unladen weight
8080 kg
Load Charts
T36.120SL Construction Telehandler
With forks and standard 405/70 x 20 tyres or DUNLOP 400/70 x 20 150B 168A2 (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 400/80 x 24 156B (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 405/70 x 20 SPT9 (option) tyres
Complies with stability test EN1459 Annex B
Performance
T36.120SL Construction Telehandler
Capacity (at max. height on tyres)
2300.00 KG
Drawbar pull (20" tyres)
5700.00
Max. gradeability with rated load (20" tyres)
28.00
Capacity at max. reach (20" tyres)
350.00 KG
Drawbar pull (24" tyres)
4900.00
Max. gradeability (20" tyres)
33.00
Max. gradeability (24" tyres)
33.00
Max. gradeability with rated load (24" tyres)
24.00
Capacity at max. reach (24" tyres)
350.00 KG
Lifting height (20" tyres)
11529.00 MM
Lifting height (24" tyres)
11613.00 MM
Max. reach (20" tyres)
8193.00 MM
Max. reach (24" tyres)
8102.00 MM
Reach at max height on tyres (20" tyres)
1940.00 MM
Reach at max height on tyres (24" tyres)
1849.00 MM
Max. reach on stabilizers (20" tyres)
8120.00 MM
Max. reach on stabilizers (24" tyres)
8030.00 MM
Leveling - Boom lift angle > 50°
2.00
Capacity at max. height on stabilizers
3200.00 KG
Capacity at max. reach on stabilizers
1200.00 KG
Lifting height on stabilizers (20" tyres)
11852.00 MM
Lifting height on stabilizers (24" tyres)
11860.00 MM
Tilt Breakout force
7800.00
Rated capacity
3600.00 KG
Cycle Times
T36.120SL Construction Telehandler
Boom raising
11.00
Boom lowering
6.00
Boom extension
13.50
Boom retraction
8.00
Crowding
4.50
Dumping
4.00
Hydraulic System
T36.120SL Construction Telehandler
Relief valve pressure setting
250.00 BAR
Control valve type
Open center with flow sharing & flow compensators technology
Hydraulic filter specs
Full flow filtration
Auxiliary flow front
65.00
Pump type
Gear pump with LS valve
Pump capacity
100.00
Hydraulic tank
69.00 L
Drive System
T36.120SL Construction Telehandler
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Traction
T36.120SL Construction Telehandler
Optional tyres
CAMSO
400/80-24 / 20PR TM R4
Max speed - turtle mode (24" / 20")
8,5 / 7
Max speed - rabbit mode (24" / 20")
30 / 26
Standard tyres
405/70-20 16PR TM R4
Brakes
T36.120SL Construction Telehandler
Engine braking
Hydrostatic
Parking and emergency brake
Passive brake
Parking brake
Passive brake
Steering
T36.120SL Construction Telehandler
Steering pump
Priority valve on pump
Steering modes
Button and screen for selection
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Fluid Capacities
T36.120SL Construction Telehandler
Gear Box
0.80 L
Axles front/rear
8,2/9,1
Adblue ® tank
22.40 L
Hydraulic system
121.00 L
Engine oil with filter
12.60 L
Fuel tank
130.00 L
Cooling system with heater
14.50 L
Fluid Specifications
T36.120SL Construction Telehandler
Coolant
Ethylen Glycol Mix 50:93
Brake fluid
None. Brakes use hydraulic system pressure
Transmission oil
ELF SF3 / TOTAL DYNATRANS FR
Grease for hinges and boom gliders
TOTAL MULTIS EP2
Engine oil
"ACEA E7/9 API CJ-4 or above Viscosity: -30 to 40 °C : SAE 0W30 -20 to 40°C : SAE 5W30 -15 to 40°C : SAE 10W30"
Hydraulic fluid
MS68
Controls
T36.120SL Construction Telehandler
Front auxiliary
Variable thumbwheel on joystick
Boom raising / lowering
Joystick electronic
Boom exension /retraction
Variable thumbwheel on joystick
Speed range and Forward/reverse drive
Switch for hydrostatic motor and switch on joystick or lever for FNR
Eco mode
Eco mode switch
SHS mode
SHS mode switch
Engine
Electronic engine speed governor
Starting
Key-type starter switch and shutdown.
Steering
Proportional hydraulic steering via a conventional steering wheel
Service brake
Pedal-activated wet multi-disk on front axle
Secondary brake
Passive brake
Auxiliary pressure release
Standard coupler + pressure release on control valve spool
Environmental
T36.120SL Construction Telehandler
Operator noise level (LpA) (EN 12053)
76.00
Level of acoustic power (LWA)
106.00
Whole body vibration (EN 13059)
1.30
Safety
T36.120SL Construction Telehandler
Seat belt, standard
Should always be worn when operating the machine
Fully enclosed operator cab. standard
"Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS)."
Boom stop, standard
Use for servicing if boom is raised
Rear window, standard
For emergency exit
Front and rear work lights, standard
Use for indoor and low light operation
Back-up alarm, standard
"For use in jobs with low visibility. Alarm sounds when operated in reverse."
Rated load capacity charts, standard
"Attached inside the cab. Provide rated load capacities for loads and attachments."
Emergency button, standard
Switches off the engine and blocks boom movements.
Parking brake, standard
Always set brake when leaving the machine
Grab handles, standard
"Should always be used when entering/exiting the telescopic"
Electrical
T36.120SL Construction Telehandler
Alternator
140.00
Battery
110.0
Starter
2.70
Dimensions
T36.120SL Construction Telehandler
Overall length (to forks tip)
6647.00 MM
Overall length (to forks face)
5442.00 MM
Overall length (to headstock pin)
5287.00 MM
Length - Front axle to forks face
1793.00 MM
Length - Rear axle to machine rear
799.00 MM
Overall length (to front tyres / Stabilizers (when equipped)
4660.00 MM
Overall height (with roof wiper)
2430.00 MM
Height back of the machine
1941.00 MM
Internal turning radius (cab)
1245.00 MM
External turning radius (with forks spaced 1040 mm ext.)
5341.00 MM
Track width
1862.00 MM
Ground clearance
415.00 MM
Wheelbase
2850.00 MM
Width over standard tyres
2264.00 MM
Overall height (with rotating beacon)
2584.00 MM
Carriage rotation angle
143.00
Operator cab outside width
930.00 MM
External turning radius (at tyres)
3765.00 MM
Engine
T36.120SL Construction Telehandler
Rated speed
2400.00 RPM
Crankshaft ventilation
Close breathing
Rated power (ISO 14396)
74.00 KW
Maximum torque at 1400 rpm
430.00
Make / Model
Bobcat D34
Fuel
"Diesel fuel low Sulphur - EN 590 : 2013 -ASTM D975C-15 Grade 1D or 2D S15"
Cooling
COOLANT
Number of Cylinders
4.0
Displacement
3.41 L
Bore
98.00 MM
Stroke
113.00 MM
Air filter
Dry replaceable cartridge with safety element
Ignition
Diesel compression
Lubrication
Gear pump pressure
Weights
T36.120SL Construction Telehandler
Unladen weight (20" tyres)
8080.00 KG
Unladen operating Weight (20" tyres)
8270.00 KG
Unladen operating Weight on rear axle (20" tyres)
4550.00 KG
Max ground Pressure on tyres-hard soil
11.0
Unlade operating Weight on front axle (20" tyres)
3720.00 KG
Unladen weight (24" tyres)
8180.00 KG
Unladen operating Weight (24" tyres)
8370.00 KG
Unlade operating Weight on front axle (24" tyres)
3770.00 KG
Unladen operating Weight on rear axle (24" tyres)
4600.00 KG
Max ground Pressure on stabs
11.0
Instruments
T36.120SL Construction Telehandler
Instruments
yes
Engine RPM
yes
Total operating hours
yes
Job hours
yes
Boom angle
yes
Vehicle speed
yes
Fuel gauge
yes
Engine coolant temperature gauge
yes
Front and rear wheel alignment status on screen
yes
Headlight full beam
yes
Headlight low beam
yes
Position lights
yes
Left and right turn
yes
Trailer turn
yes
Parking brake
yes
Longitudinal stability level
yes
Windscreen wipers
yes
Work lights
yes
Flashing warning light
yes
Hazard warning lights
yes
Gear Speed choice
yes
Hydraulic function lock
yes
Rear fog lights
yes
Heater fan
yes
Hydraulic fluid over-temperature
yes
Engine coolant over-temperature
yes
Low oil pressure
yes
Battery not charging
yes
Longitudinal stability alarm
yes
Serviceability
T36.120SL Construction Telehandler
Serviceability
yes
Air cleaner
yes
Fuel filter
yes
Engine oil filter
yes
Engine oil dipstick
yes
Starter
yes
Alternator
yes
Glass washer fluid
yes
Fuses, diodes and relays
yes
ISL control box
yes
T36.120SL Construction Telehandler
TL25.60 Construction Telehandler
Compare
TL30.60 Construction Telehandler
Compare
TL30.70 Construction Telehandler
Compare
TL35.70 Construction Telehandler
Compare
T35.105L Construction Telehandler
Compare
T40.180SLP Construction Telehandler
Compare
T41.140SLP Construction Telehandler
Compare
T36.120SL Video Gallery
See the New R-Series Telehandlers for Construction in Action