- Home
- Equipment
- Telehandlers
- Bobcat TL30.60 Construction Telehandler
TL30.60 Construction Telehandler
TL30.60 Construction Telehandler
The Bobcat R-Series TL30.60 Telehandler is your go-to tool for tackling construction jobs in tight spots. The compact machine is built with excellent maneuverability in mind. Handle daily tasks with a familiar, intuitive automotive-style layout and an all-in-one joystick with improved ergonomics.
TL30.60 Overview
TL30.60 components are well protected thanks to the shielded design, while the robust frame and boom make Bobcat Telehandlers extra tough. The smooth and automatic transmission offers surgical precision and maximum uptime with a standard 3-year warranty (or 3000 hours) on the entire machine for peace of mind.
The TL30.60 is available in the following configurations: 75 hp Low Cab, 75 hp High Cab, 100 hp Low Cab and 100 hp High Cab. Please contact your nearest dealer for more information.
TL30.60 Specifications
Compare
Key Specifications
TL30.60 Construction Telehandler
Rated Capacity
3000 kg
Lifting height
5.8 m
Rated power (ISO 14396)
74.0 kW
Max reach
3.1 m
Unladen weight
5260 kg
Load Charts
TL30.60 Construction Telehandler
With forks and standard 405/70 x 20 tyres or DUNLOP 400/70 x 20 150B 168A2 (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 405/70 x 20 SPT9 (option) tyres
Complies with stability test EN1459 Annex B
With forks and DUNLOP 400/80 x 24 156B (option) tyres
Complies with stability test EN1459 Annex B
Performance
TL30.60 Construction Telehandler
Max. gradeability (20" tyres)
33.00
Max. gradeability with rated load (20" tyres)
33.00
Lifting height (24" tyres)
5890.00 MM
Tilt Breakout force
4600.00
Capacity at max. reach (20" tyres)
1250.00 KG
Lifting height (20" tyres)
5800.00 MM
Max. reach (24" tyres)
3010.00 MM
Drawbar pull (24" tyres)
4100.00
Max. gradeability (24" tyres)
33.00
Rated capacity
3000.00 KG
Reach at max height on tyres (24" tyres)
330.00 MM
Max. gradeability with rated load (24" tyres)
28.00
Reach at max height on tyres (20" tyres)
420.00 MM
Capacity (at max. height on tyres)
2500.00 KG
Max. reach (20" tyres)
3100.00 MM
Drawbar pull (20" tyres)
4900.00
Capacity at max. reach (24" tyres)
1300.00 KG
Cycle Times
TL30.60 Construction Telehandler
Boom retraction
3.60
Dumping
2.40
Boom lowering
4.00
Crowding
2.50
Boom extension
5.00
Boom raising
5.30
Hydraulic System
TL30.60 Construction Telehandler
Relief valve pressure setting
250.00 BAR
Control valve type
Open center with flow sharing & flow compensators technology
Hydraulic tank
47.00 L
Hydraulic filter specs
Full flow filtration
Pump capacity
100.00
Auxiliary flow front
90.00
Auxiliary flow rear
20.00
Pump type
Gear pump with LS valve
Drive System
TL30.60 Construction Telehandler
Main drive
Hydrostatic motor
Transmission
Hydrostatic with electronic regulation
Traction
TL30.60 Construction Telehandler
Optional tyres
MICHELIN 400/70R24 152A8/152B IND TL XMCL
Max speed - turtle mode (24" / 20") - (Option high speed)
10 / 8,5
Max speed - turtle mode (24" / 20")
10 / 8,5
Max speed - rabbit mode (24" / 20") - (Option high speed)
40 / 35
Standard tyres
405/70-20 16PR TM R4
Max speed - rabbit mode (24" / 20")
31 /26,5
Brakes
TL30.60 Construction Telehandler
Parking brake
Passive brake
Parking and emergency brake
Passive brake
Engine braking
Hydrostatic
Steering
TL30.60 Construction Telehandler
Steering pump
Priority valve on pump
Steering modes
Button and screen for selection
Steering Mode
2 wheel steering / 4 wheel steering / Crab-steering
Fluid Capacities
TL30.60 Construction Telehandler
Adblue ® tank
22.40 L
Hydraulic system
87.00 L
Fuel tank
115.00 L
Axles front/rear
6,0/6,0
Gear Box
0.70 L
Cooling system with heater
14.50 L
Engine oil
"ACEA E7/9 API CJ-4 or above Viscosity: -30 to 40 °C : SAE 0W30 -20 to 40°C : SAE 5W30 -15 to 40°C : SAE 10W30"
Engine oil with filter
12.60 L
Fluid Specifications
TL30.60 Construction Telehandler
Grease for hinges and boom gliders
TOTAL MULTIS EP2
Brake fluid
None. Brakes use hydraulic system pressure
Transmission oil
ELF SF3 / TOTAL DYNATRANS FR
Hydraulic fluid
MS68
Coolant
Ethylen Glycol Mix 50:60
Controls
TL30.60 Construction Telehandler
Service brake
Pedal-activated wet multi-disk on front axle
Secondary brake
Passive brake
Eco mode
Eco mode switch
Boom exension /retraction
Variable thumbwheel on joystick
Engine
Electronic engine speed governor
Boom raising / lowering
Joystick electronic
Starting
Key-type starter switch and shutdown.
Steering
Proportional hydraulic steering via a conventional steering wheel
Speed range and Forward/reverse drive
Switch for hydrostatic motor and switch on joystick or lever for FNR
Auxiliary pressure release
Bobcat Coupler
Front auxiliary
Variable thumbwheel on joystick
SHS mode
SHS mode switch
Environmental
TL30.60 Construction Telehandler
Level of acoustic power (LWA)
106.00
Whole body vibration (EN 13059)
1.80
Operator noise level (LpA) (EN 12053)
76.00
Safety
TL30.60 Construction Telehandler
Seat belt, standard
Should always be worn when operating the machine
Back-up alarm, standard
"For use in jobs with low visibility. Alarm sounds when operated in reverse."
Rated load capacity charts, standard
"Attached inside the cab. Provide rated load capacities for loads and attachments."
Front and rear work lights, standard
Use for indoor and low light operation
Grab handles, standard
"Should always be used when entering/exiting the telescopic"
Boom stop, standard
Use for servicing if boom is raised
Rear window, standard
For emergency exit
Emergency button, standard
Switches off the engine and blocks boom movements.
Parking brake, standard
Always set brake when leaving the machine
Fully enclosed operator cab. standard
"Enclosed operator cab. Meets SAE-J1040 and ISO 3471 for Roll Over Protective Structure (ROPS) and SAE-J1043 and ISO 3449 for Falling Objects Protection Structure (FOPS)."
Electrical
TL30.60 Construction Telehandler
Alternator
140.00
Starter
2.70
Battery
110.0
Dimensions
TL30.60 Construction Telehandler
Overall length (to forks tip)
5712.00 MM
Overall length (to forks face)
4507.00 MM
Overall length (to headstock pin)
4140.00 MM
Overall length (to front tyres / Stabilizers (when equipped)
4035.00 MM
Overall length (to front tyres 24" / Stabilizers (when equipped)
4123.00 MM
Overall height (with rotating beacon)
2290.00 MM
Overall height with 24" tyres (with rotating beacon)
2374.00 MM
Overall height (with roof wiper)
2135.00 MM
Overall height with 24" tyres (with roof wiper)
2219.00 MM
Height back of the machine
1587.00 MM
Height back of the machine with 24" tyres
1671.00 MM
Ground clearance
264.00 MM
Ground clearance with 24" tyres
348.00 MM
Length - Front axle to forks face
1020.00 MM
Wheelbase
2820.00 MM
Length - Rear axle to machine rear
667.00 MM
Operator cab outside width
930.00 MM
Track width
1666.00 MM
Width over standard tyres
2100.00 MM
External turning radius (at tyres)
3717.00 MM
External turning radius with 24" tyres (at tyres)
3875.00 MM
Internal turning radius (cab)
1329.00 MM
Internal turning radius with 24" tyres (cab)
1503.00 MM
External turning radius (with forks spaced 1040 mm ext.)
4713.00 MM
External turning radius with 24" tyres (with forks spaced 1040 mm ext.)
4820.00 MM
Carriage rotation angle
136.00
Engine
TL30.60 Construction Telehandler
Make / Model
Bobcat D34
Bore
98.00 MM
Crankshaft ventilation
Close breathing
Stroke
113.00 MM
Rated power (ISO 14396)
74.00 KW
Ignition
Diesel compression
Number of Cylinders
4.0
Cooling
COOLANT
Displacement
3.41 L
Rated speed
2400.00 RPM
Fuel
DIESEL
Lubrication
Gear pump pressure
Air filter
Dry replaceable cartridge with safety element
Maximum torque at 1400 rpm
430.00
Weights
TL30.60 Construction Telehandler
Unladen operating Weight (20" tyres)
5435.00 KG
Unladen weight (24" tyres)
5380.00 KG
Unlade operating Weight on front axle (24" tyres)
2470.00 KG
Unladen operating Weight on rear axle (24" tyres)
3085.00 KG
Unladen operating Weight (24" tyres)
5555.00 KG
Unladen weight (20" tyres)
5260.00 KG
Unlade operating Weight on front axle (20" tyres)
2410.00 KG
Unladen operating Weight on rear axle (20" tyres)
3025.00 KG
Max ground Pressure on tyres-hard soil
11.0
Instruments
TL30.60 Construction Telehandler
Instruments
yes
Engine RPM
yes
Total operating hours
yes
Job hours
yes
Boom angle
yes
Vehicle speed
yes
Fuel gauge
yes
Engine coolant temperature gauge
yes
Front and rear wheel alignment status on screen
yes
Headlight full beam
yes
Headlight low beam
yes
Position lights
yes
Left and right turn
yes
Trailer turn
yes
Parking brake
yes
Longitudinal stability level
yes
Windscreen wipers
yes
Work lights
yes
Flashing warning light
yes
Hazard warning lights
yes
Gear Speed choice
yes
Hydraulic function lock
yes
Rear fog lights
yes
Heater fan
yes
Hydraulic fluid over-temperature
yes
Engine coolant over-temperature
yes
Low oil pressure
yes
Battery not charging
yes
Longitudinal stability alarm
yes
Serviceability
TL30.60 Construction Telehandler
Serviceability
yes
Air cleaner
yes
Fuel filter
yes
Engine oil filter
yes
Engine oil dipstick
yes
Starter
yes
Alternator
yes
Glass washer fluid
yes
Fuses, diodes and relays
yes
ISL control box
yes
TL30.60 Construction Telehandler
TL25.60 Construction Telehandler
Compare
TL30.70 Construction Telehandler
Compare
TL35.70 Construction Telehandler
Compare
T35.105L Construction Telehandler
Compare
T36.120SL Construction Telehandler
Compare
T40.180SLP Construction Telehandler
Compare
T41.140SLP Construction Telehandler
Compare
TL30.60 Video Gallery
See the New R-Series Telehandlers for Construction in Action