Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

E60 Compact Excavator

Specifications & Options


Close/Open all PDF version
Operating weight
6,130 kg
Additional weight for segmented tracks
243 kg
Additional weight for cab with HVAC
19 kg
Additional weight for long dipperstick
21 kg
Additional weight for counter weight
239 kg
Additional weight for steel tracks
125 kg
Ground pressure with rubber tracks
31.7 kPa
Bucket pivot angle
186 °
Maximum reach of working equipment
5,958 mm
Maximum reach of working equipment, long dipperstick
6,336 mm
Maximum reach at ground level
5,822 mm
Maximum reach at ground level, long dipperstick
6,209 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,436 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,533 mm
Maximum blade height
390 mm
Maximum blade depth
547 mm
Maximum height of working equipment with dipperstick retracted
4,390 mm
Maximum bucket tooth height
5,630 mm
Maximum bucket tooth height, long dipperstick
5,885 mm
Maximum dump height
4,076 mm
Maximum dump height, long dipperstick
4,331 mm
Maximum depth of vertical wall which can be excavated
2,561 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
2,941 mm
Maximum digging depth
3,537 mm
Maximum digging depth, long dipperstick
3,937 mm
(* Dentoes values which long dipperstick installed)
Blade height
422 mm
Clearance, upper structure to ground line
637 mm
Ground line to top of engine cover
1,849 mm
Length of track on ground
2,004 mm
Machine centre line to blade
1,784 mm
Minimum radius in travel position
4,278 mm
Overall length of track assembly
2,523 mm
Overall length in travel position
5,543 mm
Overall length in travel position, long dipperstick
5,541 mm
Track lug height
24 mm
Blade width
1,959 mm
2,551 mm
Track width
400 mm
Machine centre line to working equipment centre line, left-hand rotation
473 mm
Machine centre line to working equipment centre line, right-hand rotation
730 mm
Minimum turning radius
1,965 mm
Swing clearance, rear
1,265 mm
Swing clearance, rear with add-on counterweight
1,335 mm
Working width at maximum right-hand rotation
2,245 mm
Working width at maximum left-hand rotation
2,227 mm
Make / model
Bobcat 2.4L, 97/68 EC Stage V
Number of cylinders
2,392 cm3
Maximum NET power (ISO 9249)
41 kW
Maximum NET torque (ISO 9249)
190 Nm
Pump type
Single outlet variable displacement piston pump with gear pumps
Pump capacity
138.5 L/min
Boom port relief base and rod end
310 bar
Port relief pressure for boom, bucket and dipperstick circuits
310 bar
System relief pressure for slew circuit
250 bar
Auxiliary (AUX1) flow
85.7 L/min
Auxiliary (AUX2) flow
45.4 L/min
Digging force, dipperstick (ISO 6015)
33,472 N
Digging force, long dipperstick (ISO 6015)
28,405 N
Digging force, bucket (ISO 6015)
47,841 N
Travel speed, low range
2.9 km/h
Travel speed, high range
4.9 km/h
Boom swing, left
75 °
Boom swing, right
50 °
Slew rate
8.9 RPM
Cooling system
9.5 L
Engine lubrication plus oil filter
9.8 L
Fuel reservoir
72 L
Hydraulic reservoir
15.1 L
Hydraulic system
60 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
97 dB(A)
Whole body vibration (ISO 2631–1)
0.4 ms-2
Hand-arm vibration (ISO 5349–1)
0.9 ms-2
  • 1960 mm dozer blade
  • 400 mm rubber track
  • 5 inch display
  • Auto idle
  • Adjustable double acting auxiliary hydraulic (AUX1) with QC on ARM
  • Battery disconnect switch
  • Blade float feature
  • Clamp ready
  • Control console locks
  • Cupholders
  • Dual Direction Detent
  • Dual flanged rollers
  • Engine/hydraulic monitor with shutdown
  • Foldable and ergonomic pedals
  • Full fuel warning alarm
  • Horn
  • Hydraulic joystick controls
  • Machine IQ (telematic)
  • Proportional fingertip auxiliary and boom swing offset hydraulic control
  • Retractable seat belt
  • Selectable auxiliary hydraulic flow
  • Suspension seat with high back
  • Storage compartment
  • Tool box
  • TOPS/ROPS/FOPS cab * (1)
  • Two-speed travel with Auto shift
  • Upper structure tie down
  • LED Work lights
  • Warranty: 24 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • Air conditioning (Cab with HVAC)
  • Auto Air conditioning (Cab with Auto HVAC)
  • 7" touch screen
  • Keyless ignition
  • Long dipperstick
  • Add-on counterweight
  • 2nd Auxiliary hydraulics
  • Case drain line
  • Clamp with AUX1 valve
  • Tilt coupler lines (AUX4)
  • Hydraulic coupler lines (AUX5)
  • Deluxe textile suspension seat
  • Heated Deluxe textile suspension seat with head rest
  • Boom safety valve with overload warning
  • Boom & arm safety valves with overload warning
  • AM/FM MP3 stereo radio with Bluetooth
  • FOGS kit (Overhead guard)
  • Lifting chain kit
  • Travel motion alarm
  • 400 mm Steel tracks
  • 400 mm Segmented tracks
  • Fuel refill pump
  • Beacon kit
  • Left and right mirror kit
  • Fire extinguisher
  • Additional LED work light kit
  • Rubber bolt-on pads for steel tracks
  • Special applications kit (Front windscreen protection)
  • Bucket valves (AUX3) kit
  • Depth Check kit

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.