India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

L85 Compact Wheel Loaders

Specifications & Options

L85

Close/Open all PDF version
Lift breakout force (ISO 14397-2)
48.8 kN
Lift capacity (ISO 14397-2)
36.9 kN
Tipping load, straight (ISO 14397-1)
3,801 kg
Tipping load, articulated at 40° (ISO 14397-1)
3,151 kg
Model
2.4L V2 BOBCAT ENGINE
Compliency
STAGE V
Cooling
Liquid
Fuel
Diesel
Fuel Tank
78.8 L
Power at 2600RPM (ISO 14396):
50.7 kW
Operating weight, standard (ISO 6016)
5,091 kg
Shipping weight, standard (ISO 6016)
4,674 kg
Max front axle load
6,000 kg
Max rear axle load
6,000 kg
System Relief @ Quick Couplers
20.5 MPa
Hydraulic Tank
27.2 L
Auxiliary Std Flow
75.4 L/min
Auxiliary High Flow
103.5 L/min
Main Drive
Proportionally regulated hydrostatic motor
Transmission
Hydrostatic with electronic regulation
Vehicle steering
Machine articulation via hydraulic steering with steering wheel
Travel Direction
Travel direction switch (F-N-R) on joysticks. Drive pedal in work and travel mode.
Machine hydraulics
Dual axis joystick for lift, tilt and auxiliary
Vehicle braking
Combination of integrated 6 wet brake disk in rear axle with hydrostatic braking effect provision
(A)
Cab Height
2,497.7 mm
(B)
Ground Clearance
427 mm
(C)
Wheelbase
2,100 mm
(D)
Overall Length with Bucket
5,452.7 mm
(E)
Reach at Maximum Dump Height
686 mm
(F)
Dig Depth
100 mm
(G)
Maximum Dump Height
2,507.5 mm
(I)
Hinge Pin at Maximum Height
3,250 mm
(J)
Departure Angle
33.4 °
(K)
Turning Radius Over Bucket
3,829.8 mm
(L)
Turning Radius Inside Tire
1,985.6 mm
(M)
Width Over Bucket
1,900 mm
(N)
Tire Gauge
1,393 mm
(O)
Machine Width
1,800 mm
(P)
Articulation Angle
40 °
(Q)
Dump Angle at Maximum Height
45 °

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.