Middle East and Africa

North America

Russia & CIS

Southeast Asia

E17 Compact Excavator

Specifications & Options

E17

Close/Open all PDF version
Operating weight with canopy and bucket (ISO 6016)
1,711 kg
Transport mass (no attachment)
1,594 kg
Additional weight for cab with heating
96 kg
Additional weight for long dozer blade
9 kg
Ground pressure with rubber tracks
29.4 kPa
(A)
Bucket pivot angle
196 °
(B)
Maximum reach of working equipment
3,919 mm
(C)
Maximum reach at ground level
3,871 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
1,526 mm
(E)
Maximum blade height
220 mm
(F)
Maximum blade depth
204 mm
(G)
Maximum height of working equipment with dipperstick retracted
2,405 mm
(H)
Maximum bucket tooth height
3,371 mm
(I)
Maximum dump height
2,370 mm
(J)
Maximum depth of vertical wall which can be excavated
1,810 mm
(K)
Maximum digging depth
2,249 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
235 mm
(B)
Clearance, upper structure to ground line
419 mm
(C)
Ground line to top of engine cover
1,340 mm
(D)
Length of track on ground
1,114 mm
(E)
Machine centre line to blade
1,045 mm
(F)
Minimum radius in travel position
2,666 mm
(G)
Overall length of track assembly
1,476 mm
(H)
Overall length in travel position
3,665 mm
(I)
Track lug height
25 mm
(J)
Blade width
980 mm
(J*)
Blade width (extensions extended)
1,360 mm
(K)
Height
2,299 mm
(L)
Track width
230 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
433 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
589 mm
(O)
Minimum turning radius
1,128 mm
(P)
Swing clearance, rear
1,009 mm
(Q)
Working width at maximum right-hand rotation
1,801 mm
(R)
Working width at maximum left-hand rotation
1,645 mm
Make / model
Kubota / D722-E4B-BCZ-7
Fuel
Diesel
Number of cylinders
3
Displacement
0.7 L
Maximum power @ 2500 rpm (ISO 14396)
10.2 kW
Maximum torque (SAE)
43.5 Nm
Digging force, dipperstick (ISO 6015)
9,108 N
Digging force, bucket (ISO 6015)
16,177 N
Drawbar pull
14,334 N
Travel speed, low range
2.1 km/h
Travel speed, high range (optional)
4.3 km/h
Pump type
Triple gear pump
Total hydraulic capacity
32.5 L/min
Auxiliary flow
32.5 L/min
Auxiliary relief
227.0 bar
Boom swing, left
80 °
Boom swing, right
60 °
Slew rate
8.7 RPM
Cooling system
3.3 L
Engine lubrication plus oil filter
3.3 L
Fuel reservoir
19 L
Hydraulic reservoir
14.3 L
Hydraulic system
17 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.3 ms-2
Hand-arm vibration (ISO 5349–1)
0.5 ms-2
  • 230 mm rubber track
  • 980 mm dozer blade with two 190 mm blade extensions
  • Battery disconnect
  • Control console locks
  • Cupholders
  • Double acting auxiliary hydraulics
  • Engine with auto shutdown
  • Exposed counterweight with 4 mm steel tailgate
  • Foldable and ergonomic pedals
  • Full fuel warning alarm
  • Horn
  • Hydraulic and travel control lockout
  • Hydraulic joystick controls
  • Hydraulically retractable undercarriage from 1360 mm to 980 mm
  • Retractable seat belt
  • TOPS/ROPS/FOPS canopy (1)
  • Upper structure four point tie down
  • Work light
  • Warranty: 12 months, 2000 hours (whichever occurs first)
  • Water separator
  • Work light (boom)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • 1st AUX hydraulic on arm
  • Additional lights (2+1)
  • AM/FM MP3 stereo radio
  • Beacon
  • Boom load holding valve
  • Klac and MS01 couplers
  • Left and right mirror
  • Long dozer blade
  • Object handling device (safety valves + overload warning device + lifteye)
  • Special applications kit
  • Demolition package (boom, arm, bucket cylinder covers & HD travel hoses guard)
  • Fire Extinguisher
  • Keyless start
  • Travel motion alarm
  • TOPS/ROPS/FOPS cab with heater
  • Deluxe textile suspension seat
  • Two speed travel
  • Auxiliary quick couplers

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.