Middle East and Africa

North America

Russia & CIS

Southeast Asia

E35z Compact Excavator

Specifications & Options

E35z

Close/Open all PDF version
Operating weight with cab and bucket (ISO 6016)
3,499 kg
Transport mass (no attachment)
3,335 kg
Weight reduction with canopy
-118 kg
Additional weight for cab with HVAC
19 kg
Additional weight for steel tracks
96 kg
Additional weight for long dipperstick (with heavy ctw.)
303 kg
Ground pressure with rubber tracks
31.8 kPa
(A)
Bucket pivot angle
185 °
(B)
Maximum reach of working equipment
5,351 mm
(B)
Maximum reach of working equipment, long dipperstick
5,633 mm
(C)
Maximum reach at ground level
5,230 mm
(C*)
Maximum reach at ground level, long dipperstick
5,520 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,267 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,324 mm
(E)
Maximum blade height
382 mm
(F)
Maximum blade depth
456 mm
(G)
Maximum height of working equipment with dipperstick retracted
3,708 mm
(H)
Maximum bucket tooth height
4,804 mm
(H*)
Maximum bucket tooth height, long dipperstick
4,985 mm
(I)
Maximum dump height
3,340 mm
(I*)
Maximum dump height, long dipperstick
3,521 mm
(J)
Maximum depth of vertical wall which can be excavated
2,136 mm
(J)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,414 mm
(K)
Maximum digging depth
3,117 mm
(K*)
Maximum digging depth, long dipperstick
3,417 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
322 mm
(B)
Clearance, upper structure to ground line
540 mm
(C)
Ground line to top of engine cover
1,557 mm
(D)
Length of track on ground
1,647 mm
(E)
Machine centre line to blade
1,528 mm
(F)
Minimum radius in travel position
3,787 mm
(G)
Overall length of track assembly
2,074 mm
(H)
Overall length in travel position
4,823 mm
(H*)
Overall length in travel position, long dipperstick
4,832 mm
(I)
Track lug height
25 mm
(J)
Blade width
1,750 mm
(K)
Height
2,468 mm
(L)
Track width
300 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
575 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
795 mm
(O)
Minimum turning radius
1,788 mm
(P)
Swing clearance, rear
875 mm
(P*)
Swing clearance, rear, long dipperstick (with heavy counterweight)
965 mm
(Q)
Working width at maximum right-hand rotation
1,841 mm
(R)
Working width at maximum left-hand rotation
1,805 mm
Make / model
Kubota / D1703-M-D1-E4B-BC-2
Fuel
Diesel
Number of cylinders
3
Displacement
1,642 cm3
Maximum power @ 2200 rpm (ISO 14396)
18.2 kW
Maximum torque (SAE)
97.4 Nm
Digging force, dipperstick (ISO 6015)
20,790 N
Digging force, long dipperstick (ISO 6015)
18,010 N
Digging force, bucket (ISO 6015)
33,430 N
Drawbar pull
34,132 N
Travel speed, low range
2.6 km/h
Travel speed, high range
4.7 km/h
Pump type
Single outlet variable displacement, load sensing torque. Pump with gear pumps
Total hydraulic capacity
101.2 L/min
Auxiliary flow
63.9 L/min
Auxiliary relief
206.0 bar
Boom swing, left
75 °
Boom swing, right
55 °
Slew rate
8.6 RPM
Cooling system
8 L
Engine lubrication plus oil filter
5.2 L
Fuel reservoir
52 L
Hydraulic reservoir
8.3 L
Hydraulic system
39.7 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
94 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.3 ms-2
  • 1750 mm dozer blade
  • 300 mm rubber tracks
  • Adjustable double acting auxiliary hydraulic (AUX1) with Quick Couplers
  • Battery disconnect
  • Blade float feature
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Foldable and ergonomic pedals
  • Full fuel warning alarm
  • Horn
  • Hydraulic joystick controls
  • Proportional fingertip auxiliary and boom swing offset hydraulic control
  • Retractable seat belt
  • Suspension seat with high back
  • TOPS/ROPS/FOPS canopy * (1)
  • Two-speed travel with Auto shift
  • Upper structure four-point tie down
  • Water separator
  • Work light (boom)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • 1st AUX hydraulic on arm
  • 2nd AUX hydraulics
  • AM/FM stereo radio
  • Additional lights (2+1)
  • Auto idle
  • Beacon
  • Bobcat hydr. pin grabber
  • Direct-to-tank-AUX1 line
  • Dlx textile suspension seat
  • Fire extinguisher
  • Heavy counterweight
  • Keyless ignition
  • Klac coupler
  • LED lights set
  • Left and right mirror
  • Long dipperstick
  • MS03 coupler
  • Object handling device (safety valves + overload warning device + lifteye)
  • Special applications kit
  • Steel tracks
  • TOPS/ROPS/FOPS cab with heater
  • Travel motion alarm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.