Middle East and Africa

North America

Russia & CIS

Southeast Asia

E85 Compact Excavator

Specifications & Options


Close/Open all PDF version
Operating weight
8,540 kg
Additional weight for steel tracks
112 kg
Additional weight for long dipperstick
60 kg
Ground pressure with rubber tracks
38.2 kPa
Bucket pivot angle
182 °
Maximum reach of working equipment
6,915 mm
Maximum reach of working equipment, long dipperstick
7,430 mm
Maximum reach at ground level
6,765 mm
Maximum reach at ground level, long dipperstick
7,295 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,550 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,635 mm
Maximum blade height
437 mm
Maximum blade depth
304 mm
Maximum height of working equipment with dipperstick retracted
5,007 mm
Maximum bucket tooth height
6,630 mm
Maximum bucket tooth height, long dipperstick
6,980 mm
Maximum dump height
4,645 mm
Maximum dump height, long dipperstick
4,995 mm
Maximum depth of vertical wall which can be excavated
3,245 mm
Maximum depth of vertical wall which can be excavated, long dipperstick
3,755 mm
Maximum digging depth
4,175 mm
Maximum digging depth, long dipperstick
4,725 mm
(* Dentoes values which long dipperstick installed)
Blade height
408 mm
Clearance, upper structure to ground line
735 mm
Ground line to top of engine cover
1,715 mm
Length of track on ground
2,200 mm
Machine centre line to blade
1,910 mm
Minimum radius in travel position
4,785 mm
Overall length of track assembly
2,825 mm
Overall length in travel position
6,165 mm
Overall length in travel position, long dipperstick
6,265 mm
Track lug height
26 mm
Blade width
2,300 mm
2,640 mm
Track width
450 mm
Machine centre line to working equipment centre line, left-hand rotation
704 mm
Machine centre line to working equipment centre line, right-hand rotation
837 mm
Minimum turning radius
2,550 mm
Swing clearance, rear
1,300 mm
Working width at maximum right-hand rotation
2,166 mm
Make / model
Yanmar / 4TNV98C-VDB8
Number of cylinders
3,319 cm3
Maximum NET power (ISO 9249)
44.3 kW
Maximum NET torque (ISO 9249)
241 Nm
Digging force, dipperstick (ISO 6015)
43,900 N
Digging force, long dipperstick (ISO 6015)
36,600 N
Digging force, bucket (ISO 6015)
64,700 N
Drawbar pull
64,700 N
Travel speed, low range
2.7 km/h
Travel speed, high range
4.7 km/h
Pump type
One engine-driven tandem axial piston pump and one engine-driven gear pump
Piston pump capacity
151 L/min
Auxiliary flow
95 L/min
System relief pressure for auxiliary circuits
250 bar
Auxiliary relief
210.0 bar
Relief pressure for implement circuit
295.0 bar
Boom swing, left
70 °
Boom swing, right
55 °
Slew rate
9.5 RPM
Cooling system
10 L
Engine lubrication plus oil filter
10.2 L
Fuel reservoir
110 L
Hydraulic system
148 L
Noise level LpA(EU Directive 2006/42/EC)
71 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
98 dB(A)
Whole body vibration (ISO 2631–1)
0.3 ms-2
Hand-arm vibration (ISO 5349–1)
0.8 ms-2
  • 2300 mm dozer blade
  • 450 mm rubber tracks
  • 5.7 inch LCD screen
  • Engine/hydraulic monitor with shutdown
  • Fingertip auxiliary hydraulic control
  • Control console locks
  • Hydraulic joystick controls
  • Two-speed travel
  • Lockable storage compartment
  • Horn
  • Work lights
  • Retractable seat belt
  • Suspension seat with high back
  • Consoles with forwards/backwards adjustable displacement
  • Boom & arm safety valves
  • Harness for rotating beacon
  • Fully adjustable air conditioning
  • Overload warning device
  • Sun visor
  • Left rear view mirror
  • Electric refueling pump
  • Auto idle
  • Auto shift travel
  • Auxiliary hydraulics (1st and 2nd circuits)
  • Auxiliary lines on arm with quick couplers
  • Warranty: 12 months, 2000 hours (whichever occurs first)
  • Travel motion alarm
  • Steel tracks
  • Third auxiliary hydraulic line (Clamshell Piping)
  • Long dipperstick