S590 Skid-Steer Loader
Specifications & Options
S590
Close/Open all PDF version
Rated operating capacity (ISO 14397-1)
967 kg
Tipping load (ISO 14397-1)
1,935 kg
Pump capacity
64.7 L/min
Pump capacity (with high flow option)
101.1 L/min
System relief at quick couplers
23.8-24.5 MPa
Max. travel speed (high range - option)
17.3 km/h
Max. travel speed (low range)
11.8 km/h
Make / Model
Bobcat / D24
Compliancy
97/68 EC Stage IIIB
Fuel
Diesel
Cooling
Liquid
Power at 2600 RPM
49.2 kW
Torque at 1800 RPM (SAE J1995 Gross)
245 Nm
Number of cylinders
4
Displacement
2,392 cm3
Fuel tank
93.7 L
Operating weight
2,991 kg
Shipping weight
2,692 kg
(A)
Operating height
3,901 mm
(B)
Height with operator cab
1,972 mm
(C)
Angle of departure
24.2 °
(D)
Ground clearance
185 mm
(E)
Wheelbase
1,082 mm
(F)
Length without attachment
2,657 mm
(G)
Length with standard bucket
3,378 mm
(H)
Rollback at ground position
30 °
(I)
Dump height with standard bucket
2,319 mm
(J)
Height to bucket hinge pin
3,023 mm
(K)
Dump reach at maximum height
828 mm
(L)
Dump angle at maximum height
42 °
(M)
Rollback fully raised at maximum height
97 °
(N)
Width over standard bucket
1,727 mm
(O)
Turning radius with standard bucket
2,024 mm
(P)
Track, standard tyres
1,374 mm
(Q)
Width over standard tyres
1,643 mm
Vehicle steering
Direction and speed controlled by two hand levers or optional Advanced Control System (ACS) or Selectable Joystick Controls (SJC)
Loader hydraulics tilt and lift
Separate foot pedals or optional Advanced Control System (ACS) or Selectable Joystick Controls (SJC)
Front auxiliary (standard)
Electrical switch on right-hand steering lever
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
- 10 x 16.5, 10–ply, Heavy duty tyres
- 3-point seat belt
- Bobcat Interlock Control System (BICS)
- Bob-Tach™ frame
- CE certification
- Deluxe operator cab with windows (1)
- Electrically activated proportional front auxiliary hydraulics
- Engine/hydraulics system shutdown
- High-back adjustable suspension seat
- Hydraulic bucket positioning (including ON/OFF switch)
- Instrumentation
- Lift arm support
- Parking brake
- Seat bar
- Turbo-charger with approved spark arrestor
- Warranty: 12 months or 2000 hours (whichever occurs first)
- Work lights, front and rear
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I
- Factory Options
- Advanced Control System (ACS)
- Selectable Joystick Controls (SJC)
- Two speed
- Deluxe instrument panel
- Cab enclosure with heating
- Cab enclosure with HVAC
- High-Flow hydraulics
- Power Bob-Tach™
- Back-up alarm
- Beacon
- Strobe
- Radio
- Road kit
- 10 x 16.5, 10–ply, Heavy duty tyres, offset rims
- 10 x 16.5, 10–ply, Severe duty tyres
- 10 x 16.5, 10–ply, Severe duty tyres, poly filled
- 10 x 16.5, Solid Flex tyres
- 31 x 12-16.5, 10–ply, Superflotation tyres
- Dealer Installed Options
- Cab enclosure kit
- Special applications front door kit
- Front axle counterweight kit
- Deluxe instrument panel
- Replacement Bob-Tach™
- Fresh air heater kit
- Front door kit
- Door sensor kit
- Plumbing kit for fresh air heater
- Back up alarm kit
- FOPS kit **
- Single-point lift kit
- Power Bob-Tach™ kit
- Operator cab, CE, enclosure kit
- 7-pin attachment control kit
- Four-point lift kit
- Rear auxiliary hydraulic kit
- Road kit
- Keyless kit
- Rear window wiper kit
- 14-pin attachment control kit
- 4-Way flasher kit
- 80 mm Suspension seat kit
- Cup holder kit
- Headlight guard kit
- Muffler guard kit
- Tail light guard kit
- Angle Brooms
- Augers
- Backhoes
- Bale Forks
- Box Blades
- Breakers
- Brush Saws
- Brushcat™ Rotary Cutters
- Bucket Adapters
- Combination Buckets
- Concrete Mixers
- Concrete Pumps
- Construction / Industrial Buckets
- Cutter Crushers
- Diggers
- Dozer Blades
- Drop Hammers
- Dumping Hoppers
- Fertilizer and Grain Buckets
- Flail Cutters
- Graders
- Grapples, Industrial
- Landplanes
- Landscape Rakes
- Laser Equipment
- Low Profile Buckets
- Miscellaneous
- Mixing Buckets
- Mowers
- Packer Wheels
- Pallet Forks, Hydraulic
- Pallet Forks, Standard
- Planers
- Rear Stabilizers
- Root Grapples
- Rotary Grinders
- Scarifiers
- Scrapers
- Seeders
- Skeleton Buckets
- Snow & Light Material Buckets
- Snow Blades
- Snow Blowers
- Snow Pushers
- Snow V-Blades
- Sod Layers
- Soil Conditioners
- Spare Wheels
- Spreaders
- Steel Tracks
- Stump Grinders
- Sweepers
- Tillers
- Tilt-Tatch
- Tree Transplanters
- Trench Compactors
- Trenchers
- Utility Forks
- Utility Frames
- Vibratory Rollers
- Water Kits
- Wheel Saws
- Whisker Brooms
- Wood Chippers
Operator LpA(98/37 & 474-1)
87 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
101 dB(A)
Whole body vibration (ISO 2631–1)
0.7 ms-2
Hand-arm vibration (ISO 5349–1)
0.8 ms-2