Flail Cutter

Flail Cutter

  • Clears brush and small trees while distributing cut materials evenly 
  • Cutting width of 79 inches 
  • Delivers excellent cutting, mulching, and mowing action of materials up to 3 inches in diameter  
  • Thick steel deck design protects the attachment and provides maximum strength for tough clearing jobs 
  • Excels in applications that include agriculture, landscaping, utility, and rental 

Features & Benefits

Top Tasks

  • Clear brush and small trees 
  • Cut, mulch, mow and spread a fine finish 
  • Excels at cutting long grass 

How It Works

Rather than rotate, the hammers cut vertically so that cut materials are thrown down on the ground rather than out to the side. This allows cut materials to be spread evenly for a finer finish. The flail cutter attachment can also be operated while traveling in either forward or reverse. 

Compatible Models


Operating Weight
1640 lb
57.4 in
90.8 in
29.7 in
Cutting Width
78 in
Cutting Height Range
1.5-3 in. 
Cutting Capacity
Brush Material up to 3" in Diameter 
Blade Tip Speed @ 2000 rpm
8,200 ft/min
Blade Tip Speed @ 2200 rpm
9,000 ft/min
Max. Blade Tip Speed
9,000 ft/min
Flow Rate
17 gal/min

Additional Details

Side safety chains help contain debris within the housing that could be thrown during operation. The rotor brake stops the attachment in 7 seconds or less after hydraulics are deactivated.

A rubber torsion disc absorbs impact loads that are encountered during operation. To protect the drive train, the flail mower features heavy-duty flanges on both sides of the rotor to protect the drive train from dust and debris. This also prevents wire from damaging the drive train mechanism.


WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.