The front mount design makes it easier to operate and improves your visibility to the work in front of you when clearing snow.
Depending on your surface, skid shoes can be lowered to scrape the pavement clean or raised to remove snow from uneven surfaces like gravel or dirt.
The bolt-on, reversible cutting edge is designed to be replaceable to minimize your operating costs.
The front mount snowblower is available in three sizes for Bobcat® compact tractors:
FSB49 - 1000 platform
FSB62 - 2000 platform
FSB72 - 4000 and 5000 platform
The front mount snowblower uses the direct power pulled from the compact tractor’s mid-PTO to blow snow away from the machine. With the front mount design, you can blow snow while moving forward, instead of moving in reverse as you would using a 3-point snowblower implement. Height adjustments and chute rotation are hydraulically operated from the loader control valve – you can easily control both simply by moving the loader joystick.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.