Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

E27 Compact Excavator

Specifications & Options


Close/Open all PDF version
Operating weight with cab and bucket (ISO 6016)
2,683 kg
Transport mass (no attachment)
2,549 kg
Weight reduction with canopy
-118 kg
Additional weight for steel tracks
119 kg
Additional weight for heavy counterweight:
147 kg
Ground pressure with rubber tracks
26.2 kPa
Bucket pivot angle
185 °
Maximum reach of working equipment
4,721 mm
Maximum reach at ground level
4,604 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
1,924 mm
Maximum blade height
346 mm
Maximum blade height with long blade
385 mm
Maximum blade depth
302 mm
Maximum blade depth with long blade
420 mm
Maximum height of working equipment with dipperstick retracted
3,240 mm
Maximum bucket tooth height
4,429 mm
Maximum dump height
3,243 mm
Maximum depth of vertical wall which can be excavated
1,825 mm
Maximum digging depth
2,847 mm
(* Dentoes values which long dipperstick installed)
Blade height
319 mm
Clearance, upper structure to ground line
539 mm
Ground line to top of engine cover
1,540 mm
Length of track on ground
1,543 mm
Machine centre line to blade
1,245 mm
Ground clearance
1,462 mm
Minimum radius in travel position
3,135 mm
Overall length of track assembly
1,965 mm
Overall length in travel position
4,079 mm
Overall length in travel position with Heavy counterweight
4,190 mm
Track lug height
21 mm
Blade width
1,550 mm
2,438 mm
Track width
300 mm
Machine centre line to working equipment centre line, left-hand rotation
393 mm
Machine centre line to working equipment centre line, right-hand rotation
576 mm
Minimum turning radius
1,575 mm
Swing clearance, rear
995 mm
Swing clearance, rear with heavy counterweight
1,055 mm
Working width at maximum right-hand rotation
1,808 mm
Working width at maximum left-hand rotation
1,731 mm
Working width at maximum left-hand rotation with heavy counterweight
1,791 mm
Make / model
Kubota / D1305-E4B-BCZ-1
Number of cylinders
1,261 cm3
Maximum power @ 2400 rpm (ISO 14396)
18.3 kW
Maximum torque (SAE)
81.3 Nm
Pump type
Dual outlet variable displacement piston pump with gear pumps
Total hydraulic capacity
94.3 L/min
Auxiliary flow
53.8 L/min
Auxiliary relief
180 bar
Digging force, dipperstick (ISO 6015)
16,030 N
Digging force, bucket (ISO 6015)
26,520 N
Drawbar pull
28,949 N
Travel speed, low range
3 km/h
Travel speed, high range
5.1 km/h
Boom swing, left
70 °
Boom swing, right
55 °
Slew rate
9.3 RPM
Cooling system
4.5 L
Engine lubrication plus oil filter
4 L
Fuel reservoir
34.4 L
Hydraulic reservoir
10.2 L
Hydraulic system
24 L
Noise level LpA(EU Directive 2006/42/EC)
78 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
93 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.4 ms-2
  • 1550 mm dozer blade
  • 300 mm rubber tracks
  • Adjustable double acting auxiliary hydraulic (AUX1) with Quick Couplers
  • Battery disconnect switch
  • Blade float feature
  • Clamp ready
  • Control console locks
  • Cupholder
  • Engine/hydraulic monitor with shutdown
  • Foldable and ergonomic travel pedals
  • Full fuel warning alarm
  • Grease gun holder
  • Horn
  • Machine IQ (telematic)
  • Proportional fingertip auxiliary and boom swing offset hydraulic control
  • Retractable seat belt
  • Suspension seat with high back
  • Storage compartment
  • TOPS/ROPS/FOPS canopy * (1)
  • Two-speed travel with Auto shift
  • Upper structure four-point tie down
  • Water separator
  • Warranty: 24 months, 2000 hours (whichever occurs first)
  • Work light (boom)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • Add. halogen lights
  • AM/FM MP3 radio
  • A-SAC package (Tilt Coupler lines - AUX4 &Dlx displ.)
  • Auto idle
  • AUX1 direct return to tank
  • AUX1 hydraulic on arm
  • AUX2 hydraulics
  • Beacon
  • Bobcat hydr. pin grabber
  • Bucket valves (AUX3) kit
  • Case drain line
  • Clamp w/ AUX1 valve for LA
  • Comfort package cab (Cloth susp. seat & Dlx displ.)
  • Depth Check System
  • Fire extinguisher
  • Heavy counterweight
  • Hydr. coupler lines (AUX5)
  • Keyless ignition
  • Klac D and MS03 coupler
  • L/R mirrors
  • LED lights set
  • Long dipperstick w/ clamp eyes
  • OHD (Safety valves + OWD + Lifteye)
  • Special application kit
  • Steel tracks
  • TOPS/ROPS/FOPS cab w/ heater
  • Travel motion alarm

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.