With many moving parts – including idlers, rollers and sprockets – you shouldn’t chance skipping a routine inspection or maintenance. It can easily cost you valuable time, money and potentially decrease the track’s lifespan. Follow these tips to get the most performance and life out of your undercarriage.
Your compact excavator or compact track loader doesn’t sit around on the job very often. In fact, it’s busy working in mud, dirt and rock, which can build up in the undercarriage.
If you’re looking to increase your uptime, Bobcat compact track loader and excavator undercarriages are designed for easier track cleanout, helping debris fall to the ground rather than becoming packed in the undercarriage. The result? Less component wear and the reduction of additional weight to the undercarriage, helping increase fuel economy. Use shovels and pressure washers to clean remaining debris at the end of each workday.
To get the longest life from your equipment, complete a full undercarriage inspection for excessive or uneven wear, as well as damaged or missing components. Inspect the following items:
Check the tracks to make sure the components don’t look out of place. If they are, this could indicate a loose track pad or possibly a broken track pin. Inspect the rollers, idlers and drives for oil leakage. Oil leaks could indicate a failed seal, which could lead to major failure in the rollers, idlers or track drive motors.
Undercarriage management is not black and white. Conditions and situations vary but here are some universal basic practices.
Incorrect track tension may lead to increased track wear. As a general rule, when working in soft, muddy or sandy conditions, it is recommended to run the tracks slightly looser.
Select a track that matches your need and the application. Wide tracks are a good choice when lower ground pressure and flotation is desired, such as operating on established surfaces. Looking for increased ground pressure, added traction and pushing force? Choose a machine with a narrow track. Some compact equipment dealers provide non-marking tracks to avoid leaving marks on finished concrete. Your local compact equipment dealer can help you select the right rubber tracks for your application.
Lastly, minimize excessive wear and track degradation by following the basic operating and digging procedures that are outlined in your Bobcat Operation & Maintenance Manual.
These undercarriage maintenance tips, as well as proper track and operation outlined in your Bobcat Operation & Maintenance Manual, will help keep your overall cost of ownership down and help extend the life of your compact equipment tracks.