1. Home
  2. Attachments
  3. Drop Hammer
Drop Hammer
Attachment

Drop Hammer
Attachment

  • Breaks and demolishes concrete  
  • Delivers more than 3,600-foot pounds of impact energy combined with a fast cycle time of 20 blows per minute  
  • Fractures the material below the surface, leaving the surface free of jagged debris  
  • Allows three seconds to reposition and reset the loader between cycles 
  • Generates little vibration or noise compared to standard hydraulic breakers, meaning less wear on the machine and less noise for operator and bystanders 
Request a Quote

Features & Benefits

Top Tasks

  • Demolish parking lots, driveways and other large flat concrete slabs

How It Works

The drop hammer features a chain mechanism with a catch. The catch grabs the weight and raises it up. When the chain rotates over the top, the catch falls and releases the weight, dropping the hammer onto the material to be demolished.

Compatible Models

Specifications

Units

General

Drop Hammer
Operating Weight
1925 lb
Length
29 in
Width
45.2 in
Height
54.9 in
Weight of Hammer
1,140 lb
Height (hammer fully raised)
74 in
Hammer Stroke
38 in
Stroke Rate per Minute
20 
Max. Concrete Thickness
18 in
Impact Energy Class
3600 ft-lbs. 

General

Drop Hammer
Operating Weight
1925 lb
Length
29 in
Width
45.2 in
Height
54.9 in
Weight of Hammer
1,140 lb
Height (hammer fully raised)
74 in
Hammer Stroke
38 in
Stroke Rate per Minute
20 
Max. Concrete Thickness
18 in
Impact Energy Class
3600 ft-lbs. 

Additional Details

To efficiently break up concrete, the drop hammer delivers over 3,600 foot pounds of impact energy combined with a fast cycle time of 20 blows per minute. Upon impact, the drop hammer fractures the material below the surface, leaving the surface free of jagged debris. Between cycles, the drop hammer attachment allows three seconds to reposition and reset the loader. When the attachment is not in use, the hammer stands in the upright position.

Compared to standard hydraulic breakers, the drop hammer attachment generates little vibration or noise, meaning less wear on the machine and less noise for the operator and bystanders.

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.