Equipment
View All Equipment (A-Z)
Toolcat Utility Work Machines
Telehandlers
Utility Vehicles
Industrial Air Compressors
Loaders
Forklifts
Turf Renovation
Light Compaction
Warehouse Vehicles
Electric Equipment
Digital Products
Attachments & Implements
By Equipment
By Application
All Attachments
All Implements
Parts & Service
Service & Maintenance
Product & Safety Training
Owner Tools
MT55 Mini Track Loader
Year(s) of Production:
2008MT55 Mini Track Loader
Year(s) of Production:
2008MT55 Key Specifications
MT55
Rated Operating Capacity (ISO)
550 lb
Operating Weight
2610 lb
Ground Pressure (Rubber)
4.9 psi
Width
35.6 in
Height to Bucket Hinge Pin
71.2 in
Engine
MT55
Emissions Tier (EPA)
Tier 4
Engine Cooling
Liquid
Engine Fuel
Diesel
Displacement
55 in³
Number of Cylinders
3
Horsepower
24.8 hp
Performance
MT55
Rated Operating Capacity (ISO)
550 lb
Tipping Load
1610 lb
Operating Weight
2610 lb
Ground Pressure (Rubber)
4.9 psi
Travel Speed
3.5 mph
Travel Speed - Reverse
1.4 mph
Capacities
MT55
Fuel Tank
7 gal
Hydraulic System
MT55
Pump Capacity
12 gal/min
System Relief @ Quick Couplers
2,900 psi
Dimension
MT55
Length
93.1 in
Width
35.6 in
Height
49.1 in
Height to Bucket Hinge Pin
71.2 in
Length of track on ground
34 in
Reach @ Maximum Height
18.2 in
Features
MT55
Lift-Arm Support
Standard
Auxiliary Hydraulics
Standard
Spark Arrestor Muffler
Standard
Bob-Tach Attachment System
Standard
Reverse Travel Stop Panel
Standard
Wide Track
Optional
Neutral Start Interlocks
Standard
Lift Arm Lockout With Manual Bypass
Standard
Tilt Lockout
Standard
Built-In Tie Down & Crane/Lift Locations
Standard
Ride-on Platform
Optional
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.