MT55 Mini Track Loader 
 Year(s) of Production:
undefinedMT55 Mini Track Loader
Year(s) of Production:
undefinedMT55 Key Specifications
        MT55
        
Rated Operating Capacity with Bucket (Straight)
550 lbs
Operating Weight
2610 lbs
Ground Pressure (Rubber)
4.9 psi
Width
35.6 in
Height to Bucket Hinge Pin
71.2 in
Engine
        MT55
        
Horsepower
24.8 hp
Gross HP
24.8 hp
Net HP
23.3 hp
Displacement
55 cubic in
Torque (SAE NET)
39.9 ft-lb
Starter Horsepower
3.6 hp
Alternator (text)
Belt Driven; 40 amps; Open 
Battery Size
530 cca 
Number of Cylinders
3 
Fuel Consumption
1.1 gph
Performance
        MT55
        
Rated Operating Capacity with Bucket (Straight)
550 lbs
Tipping Load
1610 lbs
Operating Weight
2610 lbs
Travel Speed - Forward
3.5 mph
Travel Speed - High
3.5 mph
Travel Speed - Low
3.5 mph
Travel Speed - Reverse
1.4 mph
Lift Breakout Force (SAE)
1750 lbf
Tilt Breakout Force (SAE)
2920 lbf
Ground Pressure (Rubber)
4.9 psi
Number of Speeds
1 
Capacities
        MT55
        
Fuel Tank
7 gal 
Cooling System
7 qt 
Engine Oil with Filter
3.8 qt
Hydraulic Reservoir
2.5 gal
Float Capacity
6.7 cubic ft
Narrow Bucket Capacity
6.7 cubic ft
Hydraulic System
        MT55
        
Number of Hydraulic Pumps
1 
Pump Type
Engine driven, gear type 
Pump Capacity
12 gpm
System Relief @ Quick Couplers
2900 psi
Control Valve - Type
3-spool, open center series parallel configuration 
Number of Lift Cylinders
2 
Cylinders: Lift - Bore
2.2 in
Cylinders: Lift - Rod
1.2 in
Cylinders: Lift - Stroke
14.2 in
Cylinders: Tilt - Bore
3 in 
Cylinders: Tilt - Rod
1.2 in
Cylinders: Tilt - Stroke
10.6 in
Raise Lift Arm
2.9 sec
Lower Lift Arm
2 sec 
Bucket Dump
1.6 sec
Bucket Rollback
1.4 sec
Flow 1
11.5 gpm
Pressure 1
425 psi
Flow 2
11.1 gpm
Pressure 2
1000 psi
Flow 3
11 gpm
Pressure 3
1500 psi
Flow 4
10 gpm
Pressure 4
2000 psi
Flow 5
0 gpm 
Dimensions
        MT55
        
Length
93.1 in
Overall Length in Travel Position
93.1 in
Width
35.6 in
Height
49.1 in
Overall Height
49.1 in
Height to Bucket Hinge Pin
71.2 in
Operating Height
95.4 in
Max Dump Height
48.7 in
Reach @ Maximum Height
18.2 in
Rollback Angle - At Ground
22 deg
Carry Position
7.3 in
Length of track on ground
34 in
Track Width
7.1 in
Track Width - Wide
9.8 in
Float Bucket
44 in
Narrow Bucket
44 in
Standard Bucket
36 in
Controls
        MT55
        
Attachment Hookup
Bob-Tach 
Instrumentation
        MT55
        
Fuel Gauge
gauge 
Hourmeter
gauge 
Engine Coolant Temperature
gauge 
System Voltage
gauge 
Drive System
        MT55
        
Main Drive
Fully hydrostatic rubber track drive 
Price
        MT55
        
Trade Discount
2400 %
Additional Product Information
        MT55
        
Features
        MT55
        
Parking Brake
Standard 
Lift-Arm Support
Standard 
Two Speed Travel
Not Applicable  
Auxiliary Hydraulics
Standard 
Spark Arrestor Muffler
Standard 
Bob-Tach Attachment System
Standard 
Wide Track
Optional 
Reverse Travel Stop Panel
Standard 
Neutral Start Interlocks
Standard 
Lift Arm Lockout With Manual Bypass
Standard 
Tilt Lockout
Standard 
Built-In Tie Down & Crane/Lift Locations
Standard 
Ride-on Platform
Optional 
BobQuote
        MT55
        
 
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.