The attachment boars up to 2 feet deep and 30 feet horizontally.
The manual guide rod aligns the bit at the proper angle to ensure accurate drilling, an ideal feature when working in tight spaces.
The boring unit frame allows the drive head to be mounted on the front of the loader in three positions: on the center, right or left side. This allows the attachment to be positioned directly next to obstacles, such as buildings, and bore exactly where the operator desires.
The boring unit accommodates various sizes of bits, reamers and rock heads, allowing for maximum versatility and performance in a variety of environments.
The loader’s auxiliary hydraulics power a motor that drives a screw-type boring bit through the ground as the machine is driven forward. The ground is compacted to create a tunnel under the driveway or sidewalk.
When the bit reaches the other side, a reaming bit is installed. The loader is backed up and the rotating reaming bit further compacts the soil as it pulls the service through the enlarged tunnel.
The following components are required to operate this attachment and must be purchased separately:
This unit helps to easily install underground cables and flexible pipes with little or no damage to existing roads, sidewalks or other existing structures.
The hydraulically powered attachment bores horizontally to accommodate pipe or cable up to 4” in diameter. After boring, the attachment works to pull the pipe or cable through the hole.
The boring unit frame allows the drive head to be mounted on the front of the loader in three positions: on the center, right or left side. This allows the attachment to be positioned directly next to obstacles, such as buildings, and bore exactly were the operator desires.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.