The centering spring holds the plow blade straight while starting its cut, ensuring accurate attachment operation.
To preserve surrounding sod conditions, the coulter wheel cuts sod immediately ahead of the plow blade.
To ensure minimal ground disturbance, the pressure foot holds down the sod as the blade cuts into the ground.
For pulling pipe through the ground, a threaded pipe puller is available for working with either blade on the vibratory plow. Cable grips are also available (three sizes) for attaching to the blade and pulling the wire through the ground. For laying wire into the ground, an optional wire reel carrier can be mounted on the plow to feed wire through the chute blade and directly into the ground.
The following components are required to operate this attachment and must be purchased separately:
Pipe pull kit, Bullet, Cable reel mount kit
1
VP12 Vibratory Plow | |
---|---|
MT100 |
2
VP12 Vibratory Plow | |
---|---|
L23 | |
L28 |
Designed for mini track loaders, the vibratory plow attachment is the ideal tool for installing pipe and cable with minimal ground disturbance. Dig down with the adjustable plow blade, available in either pull or chute configurations. To preserve surrounding sod conditions, a coulter wheel cuts sod immediately ahead of the plow blade while the pressure foot holds the sod down as the blade moves up and down. The result is a knife-like slit that almost disappears as the cut is driven over by the machine.
The vibratory plow is the ideal attachment for landscaping and utility contractors looking to expand jobsite versatility of their mini track loader machines.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.