Pro-Clamp System

Expand the usual capabilities of a clamp attachment with the Pro Clamp system. As an alternative to a clamp attachment, the Pro Clamp system consists of a base component, standard pin-on work tool and optional grading tool. The system allows you to:

  • Optimize the standard clamp configuration for the task at hand. Grab large, small or irregular objects with greater confidence. You can also follow the bucket farther towards rollout compared to a standard clamp attachment. 
  • Create a smooth trench bottom with the grading tool, avoiding the need for a second “smooth lip” bucket. 
  • Clean up spoil piles quickly with the grading tool, reducing manual labor. 
  • Remove the tool when trenching, giving you enhanced visibility into the trench area

Features & Benefits

Applications

  • Perform demolition or tear-out work 
  • Create smooth trench bottoms 
  • Clean up spoil piles 
  • Install or repair utilities, removing the tool as needed for optimum visibility 

Features

  • Base Component: Accommodates the standard work tool and optional grading tool.
  • Standard Pin-on Work Tool: Offers multiple positions for grabbing large, small or irregular objects; follows bucket farther towards roll-out.
  • Grading Tool (optional): Serves as smooth cutting edge when grading or trenching with a toothed bucket; may be reversed to serve as a clamshell when paired with a smooth lip bucket.
  • Easy Installation/Removal: Remove work tool when trenching no tools are required.
Pro Clamp system on a Bobcat compact (mini) excavator gets adjusted by an operator

Adjustable for Multiple Sizes

Available in two sizes, the Pro Clamp system includes a base component and a standard pin-on material work tool. Operators may choose the ideal tool position for grabbing large, small or irregular objects without tools.
Bobcat compact (mini) excavator with bucket attachment, grading tool and Pro Clamp system grading a surface

Optional Grading Tool

Use the optional grading tool to get a smooth cutting edge when grading or trenching with a toothed bucket. It can also be reversed to serve as a clamshell when paired with a smooth lip bucket. The work tool may be removed when trenching. No tools are required to change or remove the work tool.

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.