E35i M-Series Compact (Mini) Excavator
Year(s) of Production:
2014

E35i M-Series Compact (Mini) Excavator

Year(s) of Production:
2014

Non-Current Model: See the current E35 Compact Excavator

E35i M-Series Specifications

Units

E35i M-Series Key Specifications

Operating Weight
7,468 lb
Bucket Digging Force
6,968 lbf
Maximum Reach at Ground Level
206.4 in
Width
69 in
Tail Swing Type
Zero 

E35i M-Series Key Specifications

Operating Weight
7,468 lb
Bucket Digging Force
6,968 lbf
Maximum Reach at Ground Level
206.4 in
Width
69 in
Tail Swing Type
Zero 

Engine

Emissions Tier (EPA)
Tier 4 
Engine Fuel
Diesel 
Maximum Governed RPM
2,550 rpm
Turbocharged Engine
no 
Optional Turbocharged Engine
N/A 

Performance

Operating Weight
7,468 lb
Weight Class
3,4 t
Travel Speed - High
2,9 mph
Travel Speed - Low
1,6 mph
Arm Digging Force
4,589 lbf
Bucket Digging Force
6,968 lbf
Rated Lift Capacity
2866 lb
Lift Radius
118 in
Boom Swing - Left
75° 
Boom Swing - Right
55° 
Maximum Dig Depth
122.4 in
Max Dump Height
132 in
Maximum Reach at Ground Level
206.4 in

Capacities

Fuel Tank
14 gal

Hydraulic System

Auxiliary Std Flow
16.9 gal/min
Auxiliary Pressure
2,987 psi

Dimension

Length
189.7 in
Overall Length in Travel Position
189.7 in
Width
69 in
Height
95.6 in
Height with Operator Cab
95.6 in

Features

Air Conditioning
Optional 
Cab Enclosure
Optional 
Cab Heater
Optional 
Heater Air Conditioning
Optional 
Radio
Optional 
Tail Swing Type
Zero 
Engine Shutdown
Standard 
Auxiliary Hydraulics
Standard 
Secondary Auxiliary Hydraulics
Optional 
Quick Tach System
Standard 
Rubber Track
Standard 
Selectable Auxiliary Hydraulic Flow
Standard 
Angle Blade
Optional 

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.