Lift and Tilt Function Lockouts
The function lockouts deactivate the lift and tilt functions when the engine is off. A manual lift arm bypass control allows the lift arms to be lowered when the engine is off.
Features & Benefits
Attachment Shutdown System
Stepping off the continuous flow shutoff pedal of the MT100 disengages hydraulic flow to the attachment and stops any attachment motion. The pedal must be released to start the engine.
Neutral Start Interlocks
The engine will not start if the drive/steering control, lift arm control or the auxiliary hydraulic control lever are engaged.
Parking Brake
Use whenever the loader is stopped.
Lift-Arm Supports
Prevent the lift arms from being lowered accidentally when servicing the loader with the lift arms raised.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.