SPARK PLUGS - 00:37
We will demonstrate how to properly replace or change spark plugs in a Bobcat zero-turn mower.
ENGINE OIL AND FILTER - 01:11
We will demonstrate how to change or replace engine oil and filter as recommended by the service schedules every 100 hours of operation or annually.
FUEL FILTER (INSPECT & CHANGE) - 03:18
We will demonstrate how to look at the key points to checking the fuel filter, followed with a guide to changing the fuel filter if it’s dirty, damaged, or leaking and in need of replacement.
AIR INTAKE, AIR CLEANER & COOLING FINS - 05:00
We will demonstrate how to look at some key areas that you’ll want to keep free of debris, including the air intake screen, the air cleaner and cooling fins for optimal performance, maximum uptime, and extended equipment life.
AIR CLEANER - 05:00
We will demonstrate how to go over signs that your air cleaner is dirty and needs to be replaced. Followed by how to replace the air cleaner filters. If you have a breather port, make sure it’s pointing down.
TRANSAXLE MAINTENANCE - 06:30
We will demonstrate how to do a deep dive into transaxle expansion tank types, including internal expansion tanks and external expansion tanks. We also walk-through proper maintenance of each type.
TRANSAXLE PURGE - 14:30
We will demonstrate how to look at purging the transaxle to remove air in the system.
OPERATOR PRESENCE INTERLOCK SYSTEM - 16:24
We will demonstrate how to review checking the Operator Presence Interlock System, running operation, and tire pressure.
CHECK TIRE PRESSURE - 20:26
We will demonstrate how to check the tire pressure on all the wheels of your Bobcat zero-turn mower.
GREASE LUBRICATION POINTS - 21:12
We will demonstrate how to review the convenient grease lubrication points on your Bobcat zero-turn mower.
Always read and understand the Operation, Maintenance and Owner’s Manuals. Contact your local Bobcat dealer for additional assistance, service support or questions.
VIDEO CHAPTERS:
00:00 - Intro: Bobcat Zero-Turn Maintenance
00:37 - Replace or Change Spark Plugs
01:11 - Change Engine Oil and Filter
03:18 - Inspect the Fuel Filter
03:40 - Change the Fuel Filter
05:00 - Keep the Air Intake, Air Filter and Cooling Fins Clear
05:27 - Inspect and Change Air Cleaner Filters
06:20 - Breather Port Position
06:30 - Transaxle Expansion Tank Types and Procedures
08:00 - Transaxle Maintenance with External Expansion Tank
10:02 - Transaxle Maintenance with Internal Expansion Tank
14:30 - Removing Air From The Transaxle System
16:24 - Check Operator Presence Interlock System
18:50 - Run Operation Check Procedure
20:26 - Check Tire Pressure
21:12 - Grease Lubrication Points
21:57 – Outro: Contact Bobcat.com or Your Local Dealer
