Heavy Duty Trenching Bucket
Large Excavators & Backhoe Loaders

Heavy Duty Trenching Bucket
Large Excavators & Backhoe Loaders

  • Make light work of the heaviest digging 
  • Equip your large excavator with 24-inch, 36-inch, 42-inch or 48-inch heavy-duty trenching buckets or you backhoe loader with a 24-inch or 32-inch rear bucket to upgrade your capabilities 

Compatible Models

Specifications

Units

General

Operating Weight
826 lb
52 lb
2307 lb
1158 lb
2437 lb
462 lb
572 lb
Length
52.4 in
56.9 in
52.4 in
56.9 in
27.7 in
27.7 in
Width
23.6 in
35.4 in
35.4 in
41.3 in
41.3 in
24 in
32 in
Height
40.4 in
40.4 in
47.8 in
40.4 in
47.8 in
30 in
30 in

Bucket Specs

ISO Heaped Capacity
11.34 ft³
18.9 ft³
21.6 ft³
22.95 ft³
26.19 ft³
6.4 ft³
9.2 ft³
ISO Struck Capacity
9.45 ft³
14.85 ft³
17.01 ft³
17.82 ft³
19.98 ft³
6.48 ft³
9.18 ft³
Predrilled For
Bolt-on Edges or Teeth 
Bolt-on Edges or Teeth 

General

Operating Weight
826 lb
52 lb
1158 lb
2307 lb
2437 lb
462 lb
572 lb
Length
52.4 in
52.4 in
56.9 in
56.9 in
27.7 in
27.7 in
Width
23.6 in
35.4 in
41.3 in
35.4 in
41.3 in
24 in
32 in
Height
40.4 in
40.4 in
40.4 in
47.8 in
47.8 in
30 in
30 in

Bucket Specs

ISO Heaped Capacity
11.34 ft³
18.9 ft³
22.95 ft³
21.6 ft³
26.19 ft³
6.4 ft³
9.2 ft³
ISO Struck Capacity
9.45 ft³
14.85 ft³
17.82 ft³
17.01 ft³
19.98 ft³
6.48 ft³
9.18 ft³
Predrilled For
Bolt-on Edges or Teeth 
Bolt-on Edges or Teeth 

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.