Clamp
Attachment

Clamp
Attachment

Choose from two different clamp styles designed for Bobcat® compact excavators: the Pro Clamp™ System or the standard clamp. 

Pro Clamp™ System 

  • Adjust the Pro Clamp for the job at hand - grab large, small or irregular objects with greater grip 
  • Create a smooth trench bottom with the optional grading tool, avoiding the need for a second “smooth lip” bucket 
  • Clean up spoil piles quickly with the grading tool and reduce manual labor 
  • Available as a factory installed option and as a dealer-installed accessory for select Bobcat compact excavators  
  • Compatible with standard arm and long arm configurations, but cannot be used with the extendable arm 

Standard Clamp 

  • Features a dual-tooth design which maximizes the clamp capabilities 
  • Put the clamp to work with a trenching bucket or three-tine grapple and easily move odd-shaped objects 
  • Ideal for moving and removing 

Product Overview

Top Tasks 

Pro Clamp™ System 

  • Create smooth trench bottoms 
  • Carry irregular rocks, broken concrete 
  • Perform demolition or tear-out work 
  • Clean up soil piles 
  • Install or repair utilities, removing the tool for optimum visibility 

Standard Clamp 

  • Move tree stumps, broken concrete and other odd-shaped objects 
  • Separate timber piles 
  • Carry trees 
  • Remove unwanted brush 
  • Unload pipe and lumber 
  • Lift and place landscaping boulders 
  • Place rock to build retaining walls 

How It Works 

Pro-Clamp™ System 

Available in two sizes, the Pro Clamp includes a base component and a standard pin-on material work tool. Operators may choose the ideal tool position for grabbing large, small or irregular objects. 

The optional grading tool can serve as a smooth cutting edge when grading or trenching with a toothed bucket. It can also be reversed to serve as a clamshell when paired with a smooth lip bucket. 

The work tool may be removed when trenching. No tools are required to change or remove the work tool. 

Standard Clamp 

Featuring a dual-tooth design, the clamp extends beyond the cutting edge of the bucket for holding objects. When not in use, the clamp retracts fully against the arm of the excavator to prevent interference with possible digging and trenching work. 

Compare the two clamp styles to see which works best for your job. 

Compatible Models

Specifications

Units
Hydraulic Clamp - E32R2 & E35R2, Standard/Long Arm
Hydraulic Clamp - E80
Hydraulic Clamp - E50, Standard Arm
Hydraulic Clamp - E42R2, Class III, Long Arm
Hydraulic Clamp - E42 & E45, Standard Arm
Hydraulic Clamp - E60R2, Extendable Arm
Hydraulic Clamp - E32 & E35, Extendable Arm
Hydraulic Clamp - Standard Arm, E26
Pro Clamp - E32 & E35, Standard Arm, Class III
Pro Clamp - E42 & E45, Standard Arm
Hydraulic Clamp - E20
Hydraulic Clamp - E42R2, E50R2 and E60R4
Hydraulic Clamp - E42R2, Long Arm w/TAG Bucket
Hydraulic Clamp - E42R2, Long Arm, Class III
Operating Weight
126 lb
449 lb
218 lb
171 lb
218 lb
217 lb
175 lb
126 lb
310 lb
532 lb
50 lb
Length
27.4 in
44 in
32 in
27.2 in
32 in
32.3 in
27.4 in
27.4 in
19.9 in
Width
13 in
16.5 in
14.9 in
14.4 in
14.9 in
14.9 in
13 in
13 in
13.4 in
1.6 in
Clamp Width
13 in
16.5 in
14.9 in
14.4 in
14.9 in
14.9 in
13 in
13 in
13.4 in
15.9 in
5.5 in
Tooth Radius
27.2 in
41 in
32 in
27.2 in
32 in
32.3 in
27.2 in
27.2 in
19.8 in
Tooth Thickness
0.8 in
1 in 
1 in 
0.8 in
1 in 
1 in 
0.8 in
0.8 in
0.5 in

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.