The 3-point angle blade rotates a full 360 degrees with five forward and five reverse settings to be pulled or pushed.
Available in 60-inch, 72-inch and 84-inch blade widths
A 3-point hitch is used to attach your rear-mounted angle blade implement. An adjustable top link is centered above two lower link arms, comprising the three points. The angle blade implement quickly and easily attaches with connecting pins at each point.
The angle blade implement does not require PTO. Simply attach it to your compact tractor’s 3-point hitch and get started. It rotates a full 360 degrees with five forward and five reverse blade angle settings.
The tractor blade is an economical choice for leveling, backfilling, grading and removing snow on farms or acreages.
This compact tractor implement does not require PTO, can be rotated 360 degrees, and angled to move material from either side. You can use it in forward or reverse, which allows you to push material in short runs or scrape it.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.