The heavy-duty ripper shanks adjust up or down to vary the cutting depth for mixing loose soil or tearing through compacted soil or rocks.
The ripper shanks can be replaced to extend the life of your box blade implement.
Cutting edges on the back and front allow you to work in forward or reverse to get more done in less time.
Flip the blade over to get a fresh cut, then replace it to extend the life of your implement.
The box blade is available in widths of 48 inches, 60 inches and 72 inches.
A 3-point hitch is used to attach your rear-mounted box blade implement. An adjustable top link is centered above two lower link arms, comprising the three points. The box blade implement quickly and easily attaches with connecting pins at each point.
The box blade features a durable, corrosion-resistant power-coat finish that protects the implement for extra-long life in the elements.
The box blade implement does not require PTO. Simply attach it to the 3-point hitch and get started. The implement can be raised or lowered to control the height of the cutting edge. Lower the cutting edge to cut, and raise it to dump the material.
The compact tractor box blade offers impressive versatility for leveling, backfilling, grading and moving a variety of material, including gravel, topsoil, mulch, manure and more. Lower the cutting edge to cut, and raise it to dump the material.
This compact tractor implement features heavy-duty rear-mount cutting edges that are strong enough to retain gravel, topsoil or other material you need to move. Adjustable and replaceable ripper shanks break up hard ground or compacted soil for easier moving. Steel cutting blade edges are reversible and replaceable to increase the life of your implement.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.