When installing a fence, the blade on the silt fence installer pivots relative to the frame for maximum turning ability.
Work to keep the blade straight when beginning the installation, allowing for accurate fence placement.
Slices turf, roots, and more to assist the blade in ground penetration, delivering maximum installer performance and productivity.
The prop stand provides easy mounting on a 3-point hitch for quick attachment.
The tooth easily penetrates the ground, helping to pull the blade directly into the soil when placing the fence. The tooth is replaceable for easy and affordable maintenance.
Loading the fabric is quick and easy with the quick-threading installer, featuring a guide rod and chute.
The spring-loaded end cap acts as a brake to keep the fence roll from unintentionally unrolling.
The mounting frame offers the ability to manually position the blade in multiple positions across the frame width. It delivers optimum fence placement for accurate installation.
The operator threads the silt fence under a rod and through the chute on the blade. The blade is positioned for optimum fence placement and the attachment is lowered into the ground. As the machine is driven, the silt fence unrolls automatically. When beginning to install a fence, the centering springs work to keep the blade straight, allowing for accurate placement. The fence is cut when finished.
Rigid Mounted Loader Frame: Positions the installer blade at the centerline to attach to loaders only.
3-Point Rigid Mounting Frame: Positions the installer blade in the midline of the attachment. Good, economical choice for contractors with compact tractors. (Note: A Bob-Tach™ to 3-point adapter must be used to attach to loaders).
72-Inch or 84-Inch Side Shift Frame: Positions the installer blade in multiple positions across the frame width to get close to obstacles such as buildings, streets and trees. Side shift function is accomplished manually. (Note: A Bob-Tach™ mounting system to 3-point adapter must be used to attach to loaders).
Install a more secure silt fence faster and easier with the silt fence installer attachment.
Meet erosion control regulations and avoid costly fines. The silt fence installer is the fastest, easiest, and most economical way to install silt fence. Simply load the fabric into the quick-threading installer, roll into the ground and drive – the silt fence unrolls itself. A quick change cap – mounted on the end of the silt fence installer – includes a spring-loaded plate which ensures proper tension on the fence roll, keeping the roll from accidentally unwinding while on the job. And the coulter wheel slices through the turf and roots of the working environment.
Increase productivity by installing thousands of feet of silt fence per hour while avoiding fines and project shutdowns.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.