- Home
- Attachments
- Spreader (UTVs & Toolcat)
Spreader Utility Vehicles & Toolcat
- Maintain driveways, sidewalks and parking lots
- Fits perfectly into the cargo box of Bobcat® utility vehicles and toolcats
- Rugged hopper with smooth angled walls maximizes material flow
- Hopper and frame are constructed of stainless steel
- Load up to 9.45 cubic ft. of granular materials such as sand or salt
- Make independent speed adjustments to the auger and spinner from inside the cab
- Spreading pattern from 5 feet to 30 feet
Features & Benefits - SP9 and SP13 Spreader for Toolcat & UTV
Stainless Steel Hopper
The stainless-steel hopper and frame resist corrosion and provide excellent durability for serious work.
Chute Baffle System
Baffles within the chute direct material to key areas on the spinner result in a remarkably even and consistent spread pattern with less material directed back at the vehicle.
Mesh Screen
A mesh screen at the top of the hopper filters large chunks of sand and salt to produce a consistent, even flow.
Dash-Mounted Spread Control
A convenient dash-mounted spreader control allows operators to easily adjust the auger and spinner speed to change the spread pattern of up to 30 feet – all from inside the cab.
- The SP9 mounts via the cup holder of Bobcat utility vehicles.
- The SP13 mounts through the center console of Toolcat utility work machines.
Dual Variable Spread Control
Dual variable-speed control of the spinner and HELIXX system allow for precise material delivery at low or high output. Also features auto reverse and accessory integration.
Removable Chute
Remove a single pin to flip up the chute. Remove two pins to take it off entirely and get easy hitch access and more flexible storage. The molded spinner plug must be removed when flipped for dumping.
Optional Vibrator Kit
An optional vibrator kit attaches to the structural cross member, vibrating the unit’s tub and sill to ensure material flows evenly through the spreader attachment.
Top Tasks
- Spread sand and salt for winter snow and ice removal.
- Minimize slippery surfaces during winter freezing and thawing.
- Maintain walkable and drivable roads and pathways during cold weather.
How It Works
The SP9 is compatible with the Bobcat utility vehicles while the SP13 is compatible with the Toolcat utility work machines. Optimized for efficient and cost-effective use of salt, the SP9 & SP13 is compatible with sand and salt mix, bagged rock salt, bulk salt, and dry free-flowing sand.
Conveniently connect accessories directly into the hub in the back of the hopper. Accessories automatically integrate with the hopper control with no additional wiring.
A few accessories Include:
- Spill guards
- Inverted V
- Vibrator
- LED work light
- LED strobe light
- Tarp kit
Compatible Models
Toolcat Utility Work Machines
1
Sand and Salt Spreader - SP13 | Sand and Salt Spreader - SP9 | |
|---|---|---|
UW56 |
Utility Vehicles
4
Sand and Salt Spreader - SP13 | Sand and Salt Spreader - SP9 | |
|---|---|---|
UV34 Diesel | ||
UV34 Gas | ||
UV34XL Diesel | ||
UV34XL Gas |
General
General
Additional Details
A rugged hopper with smooth angled walls maximizes material flow. Double-wall, stainless steel construction means it’s also completely rust-resistant.
Simply load it up with up to 9.45 cubic ft. of granular materials such as sand or salt. Independent speed adjustments to the auger and spinner can be made from inside the cab with dash-mounted controls. Control your spreading pattern from 5 to 30 ft.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.