DT19
Dethatcher & Verticutter

DT19
Dethatcher & Verticutter

The Bobcat® DT19 dethatcher is built for heavy-duty turf renovation and verticutting.  

  • Cover 18,700 square feet per hour with a 19 in. working width 
  • Without any tools, easily change between five different reel types  
  • Self-propelled operation

Starting at $6,599 USD*

DT19 Overview

The Bobcat DT19 is built for heavy-duty turf renovation and verticutting. With easy-to-use cutting depth controls and interchangeable reels/cutting blades for optimal efficiency, the self-propelled, walk-behind DT19 allows you to cover up to 18,700 square feet per hour.  

  • A simple height adjustment lets you fine-tune your dethatcher's slicing depth.  (Exact depths depend on blade type used.) 
  • Adjust the throttle and set cutting depth right from the user-friendly operator’s station.  
  • Experience a new world of versatility by cutting and seeding at the same time. 
  • Finish jobs without feeling exhausted with self-propelled operation, delivering a consistent ground speed that makes for better results.  

DT19 Specs & Compare

Compare
Units

DT19 Key Specifications

Engine Model
Honda GX390 
Engine Displacement
23.7 in³
Width
35.5 in
Operating Width
19 in
Reel Speed
3,200 rpm
Drive System
4L-section V-belt to front wheels by gear box and sealed roller chain; triple 3V-section V-belts engine to reel 

DT19 Key Specifications

Engine Model
Honda GX390 
Engine Displacement
23.7 in³
Width
35.5 in
Operating Width
19 in
Reel Speed
3,200 rpm
Drive System
4L-section V-belt to front wheels by gear box and sealed roller chain; triple 3V-section V-belts engine to reel 

Engine

Engine Model
Honda GX390 
Engine Displacement
23.7 in³
Horsepower
11.7 hp
Fuel Capacity
1.6 gal

Performance

Weight
376 lb

Dimensions

Length
50 in
Width
35.5 in
Height
44 in

Frame

Frame
Welded 7-gauge steel 

Wheels

Front Tire(s)
(2) 4.10/3.50 - 4 turf-tread pneumatic drive wheels 
Rear Tire(s)
(2) 4.10/3.50 - 4 sawtooth-tread pneumatic 

Reel

Operating Width
19 in
Reel Speed
3,200 rpm
Max Fixed Blade Depth
0.2 in
Flail Blade Reel
1/8 in (3 mm) hardened, high-carbon steel blades at 1 in (25 mm) spacing 
Fixed Blade Reel
Hardened, high-carbon steel blades:1/32 in (1 mm) at 1/2 in (13 mm) spacing1/32 in (1 mm) at 1 in ( 25 mm) spacing1/16 in (2 mm) at 1 in (25 mm) spacing 1/16 in (2 mm) at 1 1/2 in (38 mm) spacing 

Drive

Drive System
4L-section V-belt to front wheels by gear box and sealed roller chain; triple 3V-section V-belts engine to reel 
Clutch
Spring-loaded belt tightener 

DT19 Features & Benefits

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.