The offset dual motor and blade reduce weight, increase visibility, and make trailering easier.
The deck follows the ground contour even on slopes, while maintaining an even cut.
The short deck design provides maximum working visibility and a tighter turning radius around trees, fences, and other obstacles.
With a smooth underside, debris doesn’t get caught on the underside of the deck.
Front discs help traverse uneven terrain with minimal skips and gouging, while reducing operator fatigue.
The double-edged blades provide bidirectional cutter rotation by switching the cutter heads, increasing overall blade life.
With the direct-drive motor, power is efficiently transferred straight through to the blades. Enjoy reduced maintenance with the gearbox-free design.
Models with high-flow hydraulics provide increased torque for better performance in thick brush.
The patented blade shut off stops blade rotation when the rear roller is raised off the ground.
Integrated into the valve, the velocity fuse safeguards the hydraulic system and limits potential damage. If the hydraulic capacity of the motor is exceeded, the velocity fuse will shut off the hydraulic flow to the cutter, providing a definite uptime advantage.
The Brushcat complies with SAE J232 and ASAE S483 standards for industrial rotary cutters.
The rear tapered roller shields debris from flying out of the back of the cutting deck and improves maneuverability in turns without gouging into the ground.
The front safety chains help prevent debris from being thrown during operation.
Easily connect and disconnect the Brushcat rotary cutter with the Bob-Tach mounting system. Fast and easy mounting means spending less time on attachment changes and more time on the job.
The Brushcat rotary cutter operates while traveling both in forward and reverse. Front discs on all models allow the attachment to traverse uneven terrain with minimal skips, all while reducing operator fatigue.
The following components are required to operate this attachment and must be purchased separately:
Handle tough brush-clearing jobs easily with the industry-leading Brushcat™ rotary cutter attachment designed and built for applications in construction, agriculture, municipalities, and parks-and-recreation departments.
Using the powerful brush cutting action of the dual offset blades, the Brushcat rotary cutter mulches small branches and saplings — up to 3 inches in diameter — and cuts through the thickest grass and brush; all while maintaining the optimum power-to-blade ratio.
A lightweight, short deck and superior oscillation enable the brush cutter to follow ground contours to maintain a clean cut, even on slopes.
Available high-flow models provide impressive torque for the most challenging brush cutting projects.
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.