Adjust the gate to the desired setting for accurate control and metering of seed planting rates.
Front rollers firm and press the seed into the top half-inch of the seedbed, while rear rollers gently form the soil around the seed for optimum seed-to-soil contact.
At four bushels, the hopper’s capacity will cover several acres without refilling (depending on seed type and planting rate).
Quickly switch between the Bob-Tach™ and 3-point mounting options for leading attachment versatility.
Front rollers crush lumps and press down small stones to form a firm, well-prepared seedbed. Seed is precisely metered with the proper spacing and at the right depth, where it will germinate quickly.
Rear rollers split the shallow ridges made by the front rollers and gently form the soil around the seeds, ensuring optimum seed-to-soil contact. The result is a perfect seedbed — smooth and firm, with small stones pressed down.
11
Seeder - 72" | |
---|---|
T450 | |
T550 | |
T595 | |
T62 | |
T64 | |
T650 | |
T66 | |
T76 | |
T770 | |
T86 | |
T870 |
18
Seeder - 72" | |
---|---|
CT2025 HST | |
CT2025 MST | |
CT2035 HST | |
CT2035 MST | |
CT2040 HST | |
CT2040 MST | |
CT2535 | |
CT2540 | |
CT4045 HST | |
CT4045 SST | |
CT4050 HST | |
CT4050 SST | |
CT4055 SST | |
CT4058 HST | |
CT5545 HST | |
CT5550 HST | |
CT5555 HST | |
CT5558 HST |
11
Seeder - 72" | |
---|---|
S450 | |
S590 | |
S62 | |
S64 | |
S650 | |
S66 | |
S740 | |
S76 | |
S770 | |
S850 | |
S86 |
1
Seeder - 72" | |
---|---|
TL519 |
2
Seeder - 72" | |
---|---|
UW53 | |
UW56 |
2
Seeder - 72" | |
---|---|
Bobcat UW53 | |
Bobcat UW56 |
WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.