Snow Pusher Pro
Attachment

Snow Pusher Pro
Attachment

  • Built for the efficiency of a commercial snow remover 
  • This attachment is an angle snow blade and snow pusher all in one 
  • Three sizes are compatible with most Bobcat® compact track loaders and skid-steer loaders 
  • Available in 72-inch, 96-inch, 108-inch, and 120-inch widths
  • Compatible with the following compact loader models: S740, S770, S850, T595, T650, T740, T770, T870 and the T550 with the optional 200lb. counterweight sold separately.
  • Also available, Standard Snow Pusher

Features & Benefits

Top Tasks

  • Clear parking lots, driveways, and building sites
  • Push snow from paving stones, decorative concrete, and sloped sidewalks

Compatible Models

Specifications

Units

General

Length
77 in
77 in
70.7 in
77 in
Skid Shoes
36" x 9.75" x 1.5" poly 
36" x 9.75" x 1.5" poly 
36" X 9.75 X 1.5 Poly  
36" X 9.75 X 1.5 Poly  
Vertical Float
0 in 
0 in 
0 in 
0 in 
Tilt
35 deg
35 deg
35 deg
35 deg
Oscillation
+/- 6.0 degrees 
+/- 6 degrees 
+/- 6.0 degrees 
+/- 6.0 degrees 
Operating Weight
1529 lbs
1589 lbs
1272 lbs
1473 lbs
Width
116 in
120 in
80 in
104 in
Height
40 in
40 in
39.9 in
40 in

General

Length
77 in
77 in
77 in
70.7 in
Skid Shoes
36" X 9.75 X 1.5 Poly  
36" x 9.75" x 1.5" poly 
36" x 9.75" x 1.5" poly 
36" X 9.75 X 1.5 Poly  
Vertical Float
0 in 
0 in 
0 in 
0 in 
Tilt
35 deg
35 deg
35 deg
35 deg
Oscillation
+/- 6.0 degrees 
+/- 6.0 degrees 
+/- 6 degrees 
+/- 6.0 degrees 
Operating Weight
1473 lbs
1529 lbs
1589 lbs
1272 lbs
Width
104 in
116 in
120 in
80 in
Height
40 in
40 in
40 in
39.9 in

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.