Angle Broom
Attachment

Angle Broom
Attachment

  • Efficiently sweep and clean with the hydraulically driven angle broom attachment 
  • Heavy-duty broom bristles create a cleaner path and sweep more snow or debris in one pass 
  • Reverse bristle rotation available on the 68-inch and 84-inch angle brooms for enhanced cleaning along curbs, corners and around obstacles 
  • Reversible angle broom is available for all M-Series and R-Series compact track loaders and skid-steer loaders; as well as Toolcat™ utility work machines with the 7-pin attachment control kit 

Features & Benefits

Product Overview

Top Tasks 

  • Clear away dirt, dried mud, light snow and other debris 
  • Effective on driveways, sidewalks, parking lots, loading docks, warehouses and more 

How It Works 

The angle broom is driven by a hydraulic motor that rotates the broom at a continuous speed sweeping any dirt, snow, or debris away from the machine.  The broom can also be angled in either direction to a maximum angle of 25 degrees, allowing the operator to sweep material to the side with ease.  Reverse the rotation of the broom to easily sweep tough to access spots. 

Required Components 

The following components are required to operate this attachment and must be purchased separately: 

  • Hose extension kit (Small Articulated Loaders) 
  • Attachments control kit 

Compatible Models

Specifications

Units
Angle Broom - 48"
Angle Broom - 68"
Angle Broom - 84"
Angle Broom - 52"
Angle Broom - 64"
General
Operating Weight
260 lb
860 lb
944 lb
355 lb
385 lb
Length
46.9 in
61.8 in
61.8 in
48.3 in
48.3 in
Width
54.9 in
79.6 in
96.4 in
54.5 in
67.5 in
Height
22.8 in
34.6 in
34.6 in
28.6 in
28.2 in
Bristle Material
Replaceable Polypropylene 
Poly Orange HD 
Poly Orange HD 
Replaceable Polypropylene 
Replaceable Polypropylene 
Broom Angling
Manual 
Hydraulic 
Hydraulic 
Hydraulic 
Hydraulic 
Broom Bristle Diameter
21.4 in
32 in
32 in
26 in
26 in
Drive System
Hyd. Motor Chain Drive Reduction 
Direct Drive/Reversing 
Direct Drive/Reversing 
Hyd. Motor 
Hyd. Motor 
Oscillation
Fixed 
Fixed 
Fixed 
Fixed 
fixed 
Sweep Width (Fully angled)
41.5 in
63 in
77 in
48 in
60 in
Sweep Width (Straight)
48 in
68 in
84 in
51.5 in
63.5 in
Flow Range Low
8 gal/min 
8 gal/min 
15 gal/min
9 gal/min 
9 gal/min 
Flow Range High
13 gal/min
24 gal/min
28 gal/min
18 gal/min
18 gal/min
Number of Bristle Sections - Zig Zag
23 
36 
44 
26 
33 
Number of Bristle Sections - Straight
2 
2 
2 
0 
2 
Sweep Width (Fully angled) @
30° 
25° 
25° 
25° 
25° 
Number of Bristle Sections
27 
27 
27 

Additional Details

Sweep a clean path easily and efficiently with the hydraulically driven angle broom attachment. Quick clean-up jobs can be completed without damaging pavement surfaces.

The broom bristles have a waved design, delivering improved cleaning ability. These bristles create a cleaner path and can sweep more snow or debris in one pass. The angle broom attachment is compact, maneuverable, and easy to operate. Surfaces of all sizes can be cleaned effortlessly and efficiently saving valuable time.

Reverse bristle rotation is available on the 68” and 84” angle brooms making it more efficient to sweep leaves, snow, and debris away from corners, curbs, buildings, and obstacles.  Slow operating speeds prevent damaging the cab or machine while the broom is operating in reverse rotation. Standard orange heavy duty bristles improve bristle life and provide better visibility for the operator.

The reversible angle broom is available for all on M-series and R-series compact track loaders and skid-steers, as well as Bobcat Toolcat utility work machines with the 7 Pin Attachment Control Kit.

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.