When a project calls for winter work, contractors count on skid-steer loaders and compact track loaders to keep the operation running. Skid-steer and compact track loaders are tough enough to make the transition to the cold. And they have the versatility to move from general construction and landscaping work to snow removal with ease. Before you let your skid-steer or track loader out to take on the snow, follow this seasonal Bobcat loader maintenance checklist.
There’s nothing like an insulated mug of hot coffee to get you through a brisk winter’s day. If your compact loader could talk, it would tell you the same. Follow your Bobcat compact loader maintenance schedule and fill up with the proper cold-weather engine oil, coolant, hydraulic oil and fuel to help minimize maintenance problems.
Your compact loader Operation & Maintenance Manual has recommended maintenance schedules and oil change intervals, fluids and fuels specific to your machine and cold weather conditions. Double-check your loader manual before you change fluids to match the season.
Remember that experiment from science class where the balloon shrinks from the cold? The same thing happens to your tires. When the temperature drops, so does the tire pressure. Cold weather also makes the rubber stiffer. If you notice your tires sagging after a dip in temp, fill them up to capacity. Repair any leaks suffered in the busy season during your regular maintenance schedule. A small leak or nail in the tire is easy to put off in warmer weather – you may only have to fill your tire once a week. In winter, once a week can turn into once a day. You’ll eliminate a lot of wasted time and ensure that low tire pressure doesn’t drain your pushing and lifting power throughout the day.
It takes a little longer to get going in the mornings when it’s cold – for both you and your compact loader. You layer up and crank the heat to power through, only to find that your skid-steer or compact track loader can’t even power up. Freezing temps force your compact loader’s battery to crank twice as hard to turn over, deliver fuel to the engine and start up. Before the next project or snowfall, run a load test and check wires and connections for wear or corrosion. Even a small defect can result in a loss of cranking amps, leaving you with a dead battery, freezing your project.
Your mom never let you go out into the cold without a stocking cap. Smart woman. Freezing temps are no time to test your toughness. Don’t let your skid-steer or compact track loader leave the garage after its scheduled maintenance without checking everything that keeps the cab warm. Inspect the door and window seals to make sure heat won’t escape. Test that the heating, defogging and defrosting systems are all working, and get the heated seat turned on and warmed up. If any of those systems go out on the job, it will make for a long, uncomfortable day for you or another operator.
You dreaded shoveling as a kid. Digging out of a snowstorm meant hours of back-breaking labor – and less fun in the snow. If only you had a Bobcat compact loader back then. With the right attachment, a loader transforms into a snow removal machine. Plus, changing hydraulic attachments is fast and easy with the Bob-Dock attachment mounting system.
Attachments deserve the same level of maintenance attention as the loader itself during your scheduled maintenance checkup. Inspect the hoses, cylinders and guards, cutting blades and edges for signs of wear or damage. If the attachment requires maintenance or lubrication, check the fluid levels before you head out into the cold. This is especially important for snow removal attachments that have been collecting dust in your garage since last winter.
Construction projects don’t shut down for three months just because it’s a little chilly. Sure, the weather plays a bigger role. But many jobs move along as if winter never came. Talk to your dealer about the preventive maintenance steps on this checklist and the snow removal attachments you need to keep your machine from taking a snow day.
Learn more about what oil is best for your machine.